Call Us +44 20 81333 679 | +44 20 72 7788 02

Welcome!

  • My Cart

    Your cart is empty

    You have no items in your shopping cart.

Drivers

Electronic Expansion Valve Driver

Items 1 to 20 of 40 total

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  1. 0907858AXX - EVD EEV wired toroid

    0907858AXX - EVD EEV wired toroid

    0907858AXX - EVD EEV wired toroid Learn More
    Excl. VAT: £8.81 Incl. VAT: £10.57

  2. CVSTDUTTL0 - EVD400 CONVERTER TTL-USB

    CVSTDUTTL0 - EVD400 CONVERTER TTL-USB

    CVSTDUTTL0 - EVD400 CONVERTER TTL-USB The CVSTDUTTL0 module is a converter that is used to connect the auxiliary port on the EVD4 controller to a PC using the USB interface. This allows the EVD4 to be configured and controlled using the supervisor protocol; for this purpose, a user-friendly application for PC, EVD4_UI *, is available on the KSA site. *: this program features a configuration file that adapts to the specific application, tLAN (µC2, pCO), pLAN (pCO), RS485 (supervisor), as a positioner with 4 to 20 mA/0 to 10 V signal. See the installation and user instructions in the EVD400 manual. This converter should only be used for temporary connections (e.g. setup, programming). Learn More
    Excl. VAT: £166.88 Incl. VAT: £200.26

  3. EVBAT00100 Battery Pack

    EVBAT00100 - Rechargeable battery module, for EVD

    EVBAT00100 - Rechargeable battery module, for EVD

    This part has replaced the EVBAT00000.

    The EVBAT00100 battery module is a Carel electronic device which guarantees the EVD000000 driver power supply in case of sudden power failure allowing the driver to close the controlled electronic valve. Terminals 5, 6 and 7 must be connected with the correspondent terminals on the driver, taking care of polarities. Attention: terminal 6 must be connected only with terminal +24 Vdc of the EV driver module, to no other external power supply. Fix the battery in the coolest part of the electrical panel (on the buttom). Nota: an optional battery module box frame is available, cod. Carel EVBATBOX00

    Learn More
    Excl. VAT: £89.40 Incl. VAT: £107.28

  4. EVBAT00300 - Rechargeable battery module for EVD evolution (with battery)

    EVBAT00300 - Rechargeable battery module for EVD evolution (with battery)

    EVBAT00300 - Rechargeable battery module for EVD evolution (with battery) The EVBAT00300 module is an electronic device made by CAREL which guarantees the temporary power supply to the EVD000E* driver (up to two drivers can be connected, the maximum current input must not exceed 0.9 A) or EVD000T* (only one driver can be connected), in the case of a sudden power failure. It signals battery discharged or fault status via an open collector output, which can be used by the EVD000E* driver (EVD evolution, not EVD evolution twin) or the pCO to generate an alarm message and notify the technical service for preventive maintenance. Powered by a 12 V lead backup battery (EVBAT00500) supplies power supply to the driver for the time required to completely close the electronic valve being controlled, while during normal operation ensures the battery is correctly recharged. Learn More
    Excl. VAT: £104.18 Incl. VAT: £125.02

  5. EVBAT00400 - Rechargeable battery module for EVD evolution (without battery)

    EVBAT00400 - Rechargeable battery module for EVD evolution (without battery)

    EVBAT00400 - Rechargeable battery module for EVD evolution (without battery) The EVBAT00400 module is an electronic device made by CAREL which guarantees the temporary power supply to the EVD000E* driver (up to two drivers can be connected, the maximum current input must not exceed 0.9 A) or EVD000T* (only one driver can be connected), in the case of a sudden power failure. It signals battery discharged or fault status via an open collector output, which can be used by the EVD000E* driver (EVD evolution, not EVD evolution twin) or the pCO to generate an alarm message and notify the technical service for preventive maintenance. Powered by a 12 V lead backup battery (EVBAT00500) supplies power supply to the driver for the time required to completely close the electronic valve being controlled, while during normal operation ensures the battery is correctly recharged. Learn More
    Excl. VAT: £71.40 Incl. VAT: £85.68

  6. EVBAT00500 - Battery for EVD reachargeable battery module

    EVBAT00500 - Battery for EVD reachargeable battery module

    EVBAT00500 - Battery for EVD reachargeable battery module Battery for EVD rechargeable battery module EVBAT00400 Learn More
    Excl. VAT: £35.70 Incl. VAT: £42.84

  7. EVBATBOX10 - Battery case for EVBAT00500

    EVBATBOX10 - Battery case for EVBAT00500

    EVBATBOX10 - Battery case for EVBAT00500 This is an optional battery module box frame to install the CAREL EVBAT00500 battery pack on a DIN Rail Learn More
    Excl. VAT: £27.37 Incl. VAT: £32.84

  8. EVD0000200 - Electronic Expansion Valve driver EVD 200 (pLAN)

    EVD0000200 - Electronic Expansion Valve driver EVD 200 (pLAN)

    EVD0000200 - Electronic Expansion Valve driver EVD 200 (pLAN) Independent EEV driver module with pLAN protocol to be connected to pCO sistema controllers. This is an ideal solution for precision air-conditioning units, shelter, chillers, heat pumps suitable for the applications where the functions of the unit are more important than the cost. It manages the most common EEVs available in the market up to large cooling capacities (>50 kW).The application software of pCO sistema controllers can be easily customized so as to adapt its operation to the specific needs of the installation. Learn More
    Excl. VAT: £193.06 Incl. VAT: £231.67

  9. EVD0000300 - Electronic Expansion Valve driver EVD 300 (RS485)

    EVD0000300 - Electronic Expansion Valve driver EVD 300 (RS485)

    EVD0000300 - Electronic Expansion Valve driver EVD 300 (RS485) Independent EEV driver module with RS485 protocol for the connection to a PlantVisor supervisory system.This solution is similar to EVD200 but this advanced EEV driver can operate stand-alone. This module can be managed by a digital input and the connection to PlantVisor is needed only for the first configuration.After this the driver is independent. In addition, there is the possibility to configure the 4 to 20 mA input for positionioning EEV proportionally to the input itself. Learn More
    Excl. VAT: £193.06 Incl. VAT: £231.67

  10. EVD0000400 - Electronic Expansion Valve driver EVD 400 for universal valves (tLAN)

    EVD0000400 - Electronic Expansion Valve driver EVD 400 for universal valves (tLAN)

    EVD0000400 - Electronic Expansion Valve driver EVD 400 for universal valves (tLAN) The EVD0000400 module for electronic expansion valves with two-pole stepper motor is a controller that manages the expansion of the refrigerant in a refrigerant circuit. This function is achieved by optimising the opening of the valve using a PID algorithm and some special auxiliary control routines. The controller has a tLAN interface for connection to a Master unit (for example μC2), an RS485 adapter (present in models *410, *411, *420 and *421) that allows connection to units with the supervisor protocol, from 4800 to 19200 baud, or with the pLAN protocol. The controller automatically recognises the protocol and the baud rate. Alternatively, the controller can operate in stand-alone mode. As well as the serial connection, in any confi guration described above, the controller can be accessed for confi guration or monitoring via an auxiliary “service” serial port at 4800 baud with supervisor/tLAN protocol and network address= 1 (fi xed). The USB converter CVSTDUTTL0 is required to use the “service” serial port. This connection is for temporary use (Fig. 2). If using the “service” serial port or the supervisor protocol on the main serial port, the EVD4UI program can be used; this has a user-friendly graphic interface and is available on the KSA site. Learn More
    Excl. VAT: £151.37 Incl. VAT: £181.64

  11. EVD0000410- Electronic Expansion Valve driver EVD 400 for universal valves (pLAN)

    EVD0000410- Electronic Expansion Valve driver EVD 400 for universal valves (pLAN)

    EVD0000410- Electronic Expansion Valve driver EVD 400 for universal valves (pLAN) The EVD0000400 module for electronic expansion valves with two-pole stepper motor is a controller that manages the expansion of the refrigerant in a refrigerant circuit. This function is achieved by optimising the opening of the valve using a PID algorithm and some special auxiliary control routines. The controller has a tLAN interface for connection to a Master unit (for example μC2), an RS485 adapter (present in models *410, *411, *420 and *421) that allows connection to units with the supervisor protocol, from 4800 to 19200 baud, or with the pLAN protocol. The controller automatically recognises the protocol and the baud rate. Alternatively, the controller can operate in stand-alone mode. As well as the serial connection, in any confi guration described above, the controller can be accessed for confi guration or monitoring via an auxiliary “service” serial port at 4800 baud with supervisor/tLAN protocol and network address= 1 (fi xed). The USB converter CVSTDUTTL0 is required to use the “service” serial port. This connection is for temporary use (Fig. 2). If using the “service” serial port or the supervisor protocol on the main serial port, the EVD4UI program can be used; this has a user-friendly graphic interface and is available on the KSA site. Learn More
    Excl. VAT: £160.57 Incl. VAT: £192.68

  12. EVD0000420 - EVD400 UNIVERSAL (RS485)

    EVD0000420 - EVD400 UNIVERSAL (RS485)

    EVD0000420 - EVD400 UNIVERSAL (RS485) The EVD0000400 module for electronic expansion valves with two-pole stepper motor is a controller that manages the expansion of the refrigerant in a refrigerant circuit. This function is achieved by optimising the opening of the valve using a PID algorithm and some special auxiliary control routines. The controller has a tLAN interface for connection to a Master unit (for example μC2), an RS485 adapter (present in models *410, *411, *420 and *421) that allows connection to units with the supervisor protocol, from 4800 to 19200 baud, or with the pLAN protocol. The controller automatically recognises the protocol and the baud rate. Alternatively, the controller can operate in stand-alone mode. As well as the serial connection, in any confi guration described above, the controller can be accessed for confi guration or monitoring via an auxiliary “service” serial port at 4800 baud with supervisor/tLAN protocol and network address= 1 (fi xed). The USB converter CVSTDUTTL0 is required to use the “service” serial port. This connection is for temporary use (Fig. 2). If using the “service” serial port or the supervisor protocol on the main serial port, the EVD4UI program can be used; this has a user-friendly graphic interface and is available on the KSA site. Learn More
    Excl. VAT: £160.57 Incl. VAT: £192.68

  13. EVD0000430- EVD400 FOR CAREL VALVES ONLY (tLAN)

    EVD0000430- EVD400 FOR CAREL VALVES ONLY (tLAN)

    EVD0000430- EVD400 FOR CAREL VALVES ONLY (tLAN) The EVD0000400 module for electronic expansion valves with two-pole stepper motor is a controller that manages the expansion of the refrigerant in a refrigerant circuit. This function is achieved by optimising the opening of the valve using a PID algorithm and some special auxiliary control routines. The controller has a tLAN interface for connection to a Master unit (for example μC2), an RS485 adapter (present in models *410, *411, *420 and *421) that allows connection to units with the supervisor protocol, from 4800 to 19200 baud, or with the pLAN protocol. The controller automatically recognises the protocol and the baud rate. Alternatively, the controller can operate in stand-alone mode. As well as the serial connection, in any confi guration described above, the controller can be accessed for confi guration or monitoring via an auxiliary “service” serial port at 4800 baud with supervisor/tLAN protocol and network address= 1 (fi xed). The USB converter CVSTDUTTL0 is required to use the “service” serial port. This connection is for temporary use (Fig. 2). If using the “service” serial port or the supervisor protocol on the main serial port, the EVD4UI program can be used; this has a user-friendly graphic interface and is available on the KSA site. Learn More
    Excl. VAT: £109.70 Incl. VAT: £131.64

  14. EVD0000440 - EVD400 FOR CAREL VALVES ONLY (PLAN)

    EVD0000440 - EVD400 FOR CAREL VALVES ONLY (PLAN)

    EVD0000440 - EVD400 FOR CAREL VALVES ONLY (PLAN) The EVD0000400 module for electronic expansion valves with two-pole stepper motor is a controller that manages the expansion of the refrigerant in a refrigerant circuit. This function is achieved by optimising the opening of the valve using a PID algorithm and some special auxiliary control routines. The controller has a tLAN interface for connection to a Master unit (for example μC2), an RS485 adapter (present in models *410, *411, *420 and *421) that allows connection to units with the supervisor protocol, from 4800 to 19200 baud, or with the pLAN protocol. The controller automatically recognises the protocol and the baud rate. Alternatively, the controller can operate in stand-alone mode. As well as the serial connection, in any confi guration described above, the controller can be accessed for confi guration or monitoring via an auxiliary “service” serial port at 4800 baud with supervisor/tLAN protocol and network address= 1 (fi xed). The USB converter CVSTDUTTL0 is required to use the “service” serial port. This connection is for temporary use (Fig. 2). If using the “service” serial port or the supervisor protocol on the main serial port, the EVD4UI program can be used; this has a user-friendly graphic interface and is available on the KSA site. Learn More
    Excl. VAT: £133.23 Incl. VAT: £159.88

  15. EVD0000E00 - EVD Evolution Electronic Expansion Valves Driver  (TLAN protocol)

    EVD0000E00 - EVD Evolution Electronic Expansion Valves Driver (TLAN protocol)

    EVD0000E00 - EVD Evolution Electronic Expansion Valves Driver (TLAN protocol) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves as well as Sporlan, Alco and Danfoss. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £151.73 Incl. VAT: £182.08

  16. EVD0000E10 - EVD Evolution Electronic Expansion Valves Driver universal (pLAN)

    EVD0000E10 - EVD Evolution Electronic Expansion Valves Driver universal (pLAN)

    EVD0000E10 - EVD Evolution Electronic Expansion Valves Driver universal (pLAN) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves as well as Sporlan, Alco and Danfoss. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £183.86 Incl. VAT: £220.63

  17. EVD0000E20 - EVD Evolution Electronic Expansion Valves Driver universal (RS485/MODBUS)

    EVD0000E20 - EVD Evolution Electronic Expansion Valves Driver universal (RS485/MODBUS)

    EVD0000E20 - EVD Evolution Electronic Expansion Valves Driver universal (RS485/MODBUS) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves as well as Sporlan, Alco and Danfoss. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £183.86 Incl. VAT: £220.63

  18. EVD0000E30 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (tLAN)

    EVD0000E30 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (tLAN)

    EVD0000E30 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (tLAN) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves only. Please see the Cross reference table in the documentation section for Sporlan, Alco and Danfoss correspondance. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £110.08 Incl. VAT: £132.10

  19. EVD0000E40 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (pLAN)

    EVD0000E40 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (pLAN)

    EVD0000E40 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (pLAN) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves only. Please see the Cross reference table in the documentation section for Sporlan, Alco and Danfoss correspondance. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £133.88 Incl. VAT: £160.66

  20. EVD0000E50 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (RS485/MODBUS)

    EVD0000E50 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (RS485/MODBUS)

    EVD0000E50 - EVD Evolution Electronic Expansion Valves Driver for CAREL valve (RS485/MODBUS) The EVD evolution series of controllers for electronic valves is the latest step in the development of the famous CAREL drivers for superheat control. Compared to the standard EVD, this instrument adds advanced functions and a new user interface that makes it even easier to use and configure. A new graphic display and a simple programming procedure allow the controller to be started by selecting just 4 parameters: refrigerant used, model of valve, type of pressure probe and application (chiller, display cabinet, etc.), selected from the multiple choice menus. Main functions: • Control of Carel valves only. Please see the Cross reference table in the documentation section for Sporlan, Alco and Danfoss correspondance. • superheat control with auxiliary protectors - MOP, LOP, low superheat • assisted start-up procedure (just 4 parameters) • connection diagram visible on the display • multilanguage graphic display, with “help” on the various parameters • management of multiple units of measure • user management with passwords to access different levels of configuration • copy parameters to other EVDs using the display • LEDs for monitoring the main parameters • use of ratiometric or 4-20mA transducers (the latter shared between several drivers) • second digital input for defrost management • possibility to use backup probes Combined with the CAREL ExV series electronic expansion valves, the EVD evolution driver forms an integrated control system for the evaporator that optimises operation and achieves high levels of energy saving. The CAREL electronic expansion valves are currently available for cooling capacities up to 280 kW. Learn More
    Excl. VAT: £133.88 Incl. VAT: £160.66

Items 1 to 20 of 40 total

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction