COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

FCPM082A10 - Fan speed controller - SLAVE Board, single phase 8 A 230 Vac, IP54

On request
£126.84 £152.21
Fan speed controller power version only (SLAVE). This module is designed to work in conjunction with the MASTER board FCPM082010
Technical specifications:
Power supply: 230 V Single-phase
Frequency: 50/60 Hz
Maximum output current: 8 A 
Index of protection: IP54
Dimensions: 140x135x90 mm
Analogue input: This device is fitted with just one control input (Y1-GND) and the power circuit. It can be used in combination with an FCPM082010 (or other similar CAREL controller) to increase the power available
More Information
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.

This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection. It can control single-phase electric motors, with a load of up to 8 A/230 Vac.

Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
Manuals & Datasheets
Technical Information




Power Supply

230 Vac (-15% to +10%), 50/60 Hz with autosensing


8A max. 0 to 230 Vac

Analog inputs

ratiometric type 0 to 5 Vdc, 8 mA or NTC

Operating conditions

-20T50 °C, <85% rH non-condensing

Storage conditions

-20T70 °C, <85% rH non-condensing

Index of protection



Manufacturer Carel