COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

FCSM042300 - FAN SPEED CONTROLLER-CUT PHASE 0-10V 4A/230VAC

Back in stock on 05/10/20
SKU
FCSM042300
£58.26 £69.91
Technical specifications:

Power supply: 230V Single-phase
Rated current: 4A
Frequency: 50/60Hz
Control signal: 0 to 10Vdc
Index of protection: None (open board)
Power supply for possible manual control (+V terminal): 20 Vdc 40 mA
Dimensions: 82W x 107H x 40D
Input/output characteristic: Curve
More Information
Description
The single-phase FCS units are electronic voltage regulators that use the phase-control principle to regulate the output voltage supplied to the load, according to a control signal input.

The controllers are used to control asynchronous motors, such as fans, pumps, mixers, stirrers, etc. By applying a 0 to 10 Vdc control signal, the effective voltage provided to the load varies from 0 to 230 Vac.

The board also features, at the terminal marked +V, a non-stabilised power source, 20 Vdc 40 mA, which can be used to create a manual control signal using a 10 kOhm potentiometer. The controllers are protected against short-circuits by a fuse on the outside of the board, for easy access and, where necessary, replacement. Check that the motors used are suitable for phase control applications.
Manuals & Datasheets
 DATA-SHEET   BROCHURE 
DATASHEET BROCHURE
Technical Information

TECHNICAL FEATURES

 

 

Power Supply

230 Vac (-15% to +10%), 50/60 Hz

Control signal

0 to 10 Vdc

Input signal impedance

180 kOhm

Operating conditions

-10T50 °C, <90% rH non-condensing

Storage conditions

-20T70 °C, <90% rH non-condensing

Index of protection

NONE

 

Manufacturer Carel