01UT-1L - Outside Temperature Sensor

01UT-1N - Outside Temperature Sensor, NTC10k Carel

01DT-1AH - Duct/Immersion Temperature Sensor L=50 mm

01DT-1AH - Duct/Immersion Temperature Sensor L=50 mm, D=6 mm, PT100

22DTH-11MN - Duct Humidity, Temperature Sensor (L=140mm), DC 0...5 V, DC 0...10 V rH% and NTC Carel

£162.32 £135.27
Only 6 left
In stock
SKU
22DTH-11MN

22DTH-11MN
Duct sensor humidity / temperature passive Carel NTC 10K
AC/DC 24 V, 2 outputs DC 0...5 /10 V adjustable
Probe length 140 mm, probe diameter 19.5 mm
NEMA 4X / IP65
Measuring ranges field selectable, incl. mounting flange
Removable spring loaded terminal block max. 2.5 mm²

Electrical data Power Supply DC 15...24 V, ±10%, 0.4 W
  Power Supply AC 24 V, ±10%, 0.8 VA
  Electrical connection Removable spring loaded terminal block max. 2.5 mm²
  Cable entry cable gland PG11 Ø6...10 mm, with strain relief Ø6...8 mm
Functional data Sensor Technology Polymer capacitive sensor with stainless steel wire mesh filter
  Multirange YES
  Output signal active note Output DC 0...5/10 V with Jumper adjustable Voltage output: min. 10 kΩ load
  Media Air
Measuring data Measured values Temperature
    Humidity
    Dew point
    Enthalpies
    Absolute humidity
  Measuring range humidity 0...100% rH non-condensing
  Measuring range temperature  Passiv Sensor: depending on sensor type range selectable
   
Settings  range[°C]  range [°F] Factory setting
S0 -40...60 °C  -40...160 °F  
S1 0...50 °C 40...140 °F  
S2 -15...35 °C 0...100 °F  
S3 -20...80 °C 0...200 °F  
  Measuring range absolute humidity adjustable at the transducer:
    0...50 g/m³ (default setting)
    0...80 g/m³
  Measuring range enthalpy 0...85 kJ/kg
  Measuring range dew point adjustable at the transducer:
    0...50 °C (default setting)
    -20...80 °C
  Accuracy humidity ±2% between 10...90% rH @ 21 °C
  Accuracy temperature ±0.5 °C @ 25 °C
    NTC10k Pre (10k3): ±0.2 °C @ 25 °C
  Operating condition air flow max. 12 m/s
Materials Cable gland PA6, black
  Housing Cover: Lexan, Belimo orange NCS S0580- Y6OR
    Bottom: Lexan, Belimo orange NCS S0580- Y6OR
    Seal: 0467 NBR70, black
More Information
Manuals & Datasheets

MANUAL 

 MOUNTING

INSTRUCTIONS 

 BROCHURE 
Manual DATASHEET BROCHURE
Technical Information
Scope of delivery Mounting flange  
Belimo