22WDP-112 - Differential Pressure Sensor Water L=0...2.5 bar, DC 0...10 V

On request
SKU
22WDP-112
£230.67 £276.80

22WDP-112
Differential pressure sensor liquids 0...2.5 bar
AC/DC 24 V, output DC 0...10 V
NEMA 4 / IP65
Connection G 1/4" (internal thread)

More Information
Manuals & Datasheets

MANUAL 

 MOUNTING

INSTRUCTIONS 

 BROCHURE 
Manual DATASHEET BROCHURE
Technical Information
Optional accessories Description Type
  Pipe connector brass, 2 pcs., Pipe 6 mm to G 1/4" (external thread) A-22WP-A04
  Pipe connector stainless steel, 2 pcs., Pipe 6 mm to G 1/4" (external thread) A-22WP-A06
  Pipe connector brass, 2 pcs., Pipe 8 mm to G 1/4" (external thread) A-22WP-A08
  Pipe connector stainless steel, 2 pcs., Pipe 8 mm to G 1/4" (external thread) A-22WP-A10
Manufacturer Belimo
Description
Electrical data Power Supply DC 15...24 V, ±10%, 0.37 W
  Power Supply AC 24 V, ±10%, 0.9 VA
  Electrical connection Plug for wire 0.5...1.5 mm²
  Cable entry Angle plug according to DIN 43650, construction A
Functional data  Output signal active pressure DC 0...10 V
  Output signal active note Voltage output: min. 2 kΩ load
  Mechanical connection pressure connector: G1/4"
  Mounting installation position unrestricted
  Media Water
Measuring data Measured values Differential pressure
  Measuring media Air and non-aggressive gases
  Accuracy pressure <±1% of measuring range (@ -5...75 °C)
  Overload range 6 bar, Single-sided
  Maximum system pressure 21 bar
Materials Housing seal EPDM
  Housing Bottom Part: Stainless steel 1.4305
    Top Cover: Aluminum pressure die casting
  Medium wetted parts Stainless steel 1.4301, Ceramic