COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

D632N - 2-way butterfly valve, PN6/10/16 wafer type, DN 32, kvmax 55 Housing GGG40, seal EPDM

On request
SKU
D632N
£59.33 £71.20

D632N -  2-way butterfly valve, PN6/10/16 wafer type, DN 32, kvmax 55 Housing GGG40, seal EPDM

•    2-way butterfly valve, PN6/10/16
•    wafer type, DN 32, kvmax 55
•    Housing GGG40, seal EPDM
•    Valve disk stainless steel SS304
•    Temperature of medium -20°C..+ 120°C


D6350N -  2-way butterfly valve, PN16 wafer type, DN 350, kvmax 10900 Housing GGG40, seal EPDM
More Information
Description

Features

  • Mode of operation The butterfly valve is opened or closed completely by an open-close rotary actuator. Continuous rotary actuators are controlled by a commercially available controller and move the valve discs into any position desired. The disc made of stainless steel is pressed into the soft-sealing EPDM seat by a rotary movement and ensures leakage rate A (tight). The flow rate losses are slight in open position and the kvs value is high.

  • Manual override Manual throttling or shut-off can be carried out with a lever or a worm gear (see «Accessories»). – With lever (DN 25 ... 150): Adjustable in 10 ratchet steps with position indication (0 = 0° ; 9 = 90° ). – With worm gear (DN 25 ... 700): Steplessly adjustable (self-locking) with position indication.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Media Cold and warm water, water with max 50% volume of glycol
•    Media temperature –20°C ... +120°C
•    Rated pressure ps 1600 kPa
•    Flow rate kvs See «Overview of types»
•    Leakage rate A, tight (EN 12266-1)
•    Pipe connectors DN 25 ... DN 200 DN 250 ... DN 350 DN 400 ... DN 700 Flange PN 6 / PN 10 / PN 16 (according to ISO 7005-2) Flange PN 10 2) / PN 16 (according to ISO 7005-2) Flange PN 16 (according to ISO 7005-2)
•    Suitable connecting flanges According to ISO 7005-2 and EN 1092-2
•    Angle of rotation 90°
•    Installation position Vertical to horizontal (in relation to the stem)
•    Maintenance Maintenance-free
•    Materials Fitting EN-JS1030 (GGG 40), Epoxy powder-coating (RAL 5002)
•    Disc DIN/EN 1.4301 / AISI SS 304 (Stainless steel)
•    Stem DIN/EN 1.4005 / AISI SS 416 (Stainless steel)
•   Seat EPDM
•    Stem seal EPDM O-ring
•    Stem bearing RPTFE

Manufacturer Belimo