COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

GM230G-T - Damper actuator NEMA4 40 Nm, 150 s / 90°, AC 230 V, Open/Close

On request
SKU
GM230G-T
£316.67 £380.00

GM230G-T - Damper actuator NEMA4 40 Nm, 150 s / 90°, AC 230 V, Open/Close

•    IP 66 NEMA4, Manual override with push-button
•    Control single-wire
•    Connection with terminals
•    Direction of rotation selectable
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp
•    Sound power level max.45 dB (A)

More Information
Description

Features

 

  • Fields of application The actuator is particularly suitable for utilisation in outdoor applications and is protected against the following weather conditions:
    – UV radiation
    – rain / snow
    – dirt / dust
    – humidity
    – Changing atmosphere / frequent and severe temperature fluctuations (recommendation: use the actuator with integrated factory-installed heating which can be ordered separately to prevent internal condensation * {in development})

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual override with pushbutton possible (the gear is disengaged for as long as the button is pressed or remains locked).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops. Standard setting 0 ... 90°. The housing cover must be removed to set the angle of rotation.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•    Nominal voltage range AC 85 ... 265 V
•    Power consumption In operation 5 W @ nominal torque
•    At rest 2.5 W
•    For wire sizing 9 VA
•    Connection Terminals 4 mm2 (cable ∅ 4 ... 10 mm)
•    Functional data Torque (nominal torque) Min. 40 Nm @ nominal voltage
•    Direction of rotation Reversible with switch
•    Manual override Gearing latch disengaged with pushbutton, can be locked
•    Angle of rotation Max. 95°, can be limited at both ends with adjustable mechanical end stops
•    Running time 150 s / 90°
•    Sound power level Max. 45 dB (A)
•    Position indication Mechanical, pluggable
•    Safety Protection class II Totally insulated
•    Degree of protection IP66 NEMA 4, UL Enclosure Type 4
•    EMC CE according to 2004/108/EC
•    Low-voltage directive CE according to 2006/95/EC
•    Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1 and UL 60730-2-14 and CAN/CSA E60730-1:02
•    Mode of operation Type 1
•    Rated impulse voltage 2.5 kV
•    Control pollution degree 4
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 100% r.h.
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 3
•    Weight Approx. 4.7 kg

Manufacturer Belimo