COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

GM24A-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close IP 54, Manual override with push-button

On request
SKU
GM24A-TP
£157.33 £188.80

GM24A-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close IP 54, Manual override with push-button


•    Control with single- / 2-wire contact
•    Connection terminals IP54
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp

More Information
Description

Features
 

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Nominal voltage range AC/DC 19.2 ... 28.8 V
•    Power consumption In operation 4 W @ nominal torque
•    At rest 2 W
•    For wire sizing 6 VA
•    Connection Terminals 4 mm2 (Kabel Ø 4 ... 10 mm, three-core)
•    Functional data Torque (nominal torque) Min. 40 Nm @ nominal voltage
•    Direction of rotation Reversible with switch 0 / 1
•    Manual override Gearing latch disengaged with pushbutton, detentable
•    Angle of rotation Max. 95°, limited on both sides by means of adjustable, mechanical end stops
•    Running time 150 s / 90°
•    Sound power level Max. 45 dB (A)
•    Position indication Mechanical, pluggable
•    Protection classIII Safety extra-low voltage
•    Degree of protection IP54 in any mounting position NEMA2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-01:02Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 0.8kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    Weight Approx. 1.7 kg

Manufacturer Belimo