COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

LM230ASR-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V

On request
SKU
LM230ASR-TP
£102.67 £123.20

LM230ASR-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V 


•  Modulating
•   IP 54, Manual override with push-button
•   Control DC 0...10 V
•   Operating range DC 2...10 V
•   Position feedback DC 2...10 V
•   Connection Screw terminal with cover IP54
•   Direction of rotation reversible (right/left)
•   Angle of rotation limit. mechanical adjustable


More Information
Description

Features


  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation is possible with the pushbutton possible (the gear is disengaged for as long as the button is pressed or detented).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 1.8 W @ nominal torque
•     At rest 1 W
•     For wire sizing 4 VA
•     Connection Power supply Signals
•     Terminals 4 mm2 (Cable Ø 6 ... 8 mm, two-core)
•     Terminals 4 mm2 (Cable Ø 6 ... 8 mm, four-core)v
•     Functional data Torque (nominal torque) Min. 5 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ
•     Working range DC 2 ... 10 V
•     Position feedback (Measuring voltage) DC 2 ... 10 V, max. 1 mA
•     Auxiliary supply DC 24 V ±30%, max. 10 mA
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch
•     Direction of rotation at Y = 0 V At switch position resp.
•     Manual override Gearing latch disengaged with pushbutton, detentable
•     Angle of rotation Max. 95° , limited on both sides by means of adjustable, mechanical end stops
•     Running time 150 s / 90°
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II Totally insulated
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Low voltage directive CE according to 73/23/EEC
•     Mode of operation Type 1 (to EN 60730-1)
•     Rated impulse voltage 4 kV (to EN 60730-1)
•     Control Pollution Degree 3 (to EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 700 g

Manufacturer Belimo