COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

LU230A - Full-rotation actuator 3 Nm, 150 s / 360° / constant, endless AC 230 V

On request
SKU
LU230A
£50.10 £60.12

LU230A - Full-rotation actuator 3 Nm, 150 s / 360° / constant, endless AC 230 V


•    Modulating, MFT
•    Manual override with integrated position stop
•    Running time spring approx. 20 s
•    Control Open/Close with single-wire contact
•    Auxiliary switch 2 x int., potential-free, fix 5°, 85°
•    Emergency control closedYES


 

More Information
Description

Features
 

 

  • Simple direct mounting Form-fit direct mounting on a 12 mm or 8 mm damper spindle (with insert).The actuator can also be optionally equipped with a 10 mm form fit or an 8 ... 12 mm clamp (see «Accessories»).

  • Manual override Manual operation is possible with the self-resetting pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed).

  • Adjustable angle of rotation  The angle of rotation of the full-rotation actuator can be adjusted in 10° increments between 0 and 330°  with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 2 W @ nominal torque
•     At rest 1 W
•     For wire sizing 4.5 VA
•     Connection Cable 1 m, 3 x 0.75 mm2
•     Functional data Torque Min. 3 Nm @ nominal voltage
•     Direction of rotation Reversible with switch 0 or 1
•     Manual override Gearing latch disengaged with pushbutton,
•     self-resetting
•     Angle of rotation Endless (adjustable 0 ... 330° with angle of rotation limiter ZDB-LU)
•     Running time 150 s / 360°
•     Sound power level max. 35 dB (A)
•     Spindle driver Form-fit 12 mm or 8 mm (with insert)
•     Safety Protection class II Totally insulated
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Low voltage directive CE according to 73/23/EEC
•     Mode of operation Type 1 (EN 60730-1)
•     Rated impulse voltage 4 kV (EN 60730-1)
•     Control Pollution Degree 3 (EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 650 g

Manufacturer Belimo