COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NM230A-TP - Damper actuator 10 Nm, 150 s, 95° AC 230 V

On request
SKU
NM230A-TP
£80.00 £96.00

NM230A-S-TP - Damper actuator 10 Nm, 150 s, 95° AC 230 V


•    Open/Close, 3-point
•    IP 54, Manual override with  push-button
•    Control with single- / 2-wire contact  
•    Connection Screw terminal with cover IP54
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral

More Information
Description

Features
 


  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or detented).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stop.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 2.5 W @ nominal torque
•     At rest 0.6 W
•     For wire sizing 6 VA
•     Connection Terminals 4 mm2 (Cable Ø 6 ... 8 mm, three-core)
•     Functional data Torque (nominal torque) Min. 10 Nm @ nominal voltage
•     Direction of rotation Reversible with switch 0 or 1
•     Manual override Gearing latch disengaged with pushbutton, detentable
•     Angle of rotation Max. 95°<) , limited on both sides by means of adjustable, mechanical end stops
•     Running time 150 s / 90°<)
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II Totally insulated
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Low voltage directive CE according to 73/23/EEC
•     Mode of operation Type 1 (to EN 60730-1)
•     Rated impulse voltage 4 kV (to EN 60730-1)
•     Control Pollution Degree 3 (to EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 800 g

Manufacturer Belimo