COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NM230PSR - Damper actuator 8 Nm, 150 s, 95° AC 230 V

On request
SKU
NM230PSR
£227.33 £272.80

NM230PSR - Damper actuator 8 Nm, 150 s, 95° AC 230 V


•    Modulating
•    IP 66/67, Manual override by means of push-button
•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Connection cable FRNC 1 m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp








More Information
Description

Features
 


  • Fields of application The actuator is particularly suited for use in difficult conditions, e.g. in the field of:
      – Wood drying
      – Animal breeding
      – Food processing
      – Agricultural
      – Swimming baths / Bathrooms
      – Rooftop units
      – General outdoor applications
      – Low temperatures (the separately available actuator with built-in heater ex works is suitable for use up to –40°C)
  •              – Changing climate / frequent and strong fluctuations in temperature (Recommendation: to prevent internal condensation, use the separately available                 actuator with built-in heater ex works)




    Resistances
    Test Test standard Testing body
    Noxious gas tests EN 60068-2-60 Fraunhofer Institute ICT / DE
    Salt fog spray test EN 60068-2-52 Fraunhofer Institute ICT / DE
    Ammoniac test DIN 50916-2 DIN 50916-2
    Climatic test IEC 60068-2-30 Trikon Solutions AG / CH
    Disinfectants (animals)   Trikon Solutions AG / CH
    UV test (Solar radiation at ground level) EN 60068-2-5 EN 60068-2-63 Quinel / Zug CH


    Used materials

    Actuator parts Material
    Actuator housing Polypropylene (PP)
    Cable glands / hollow shaft Polyamide (PA)
    Connection cable FRNC
    Clamp / screws in general Steel 1.4404
    seals EPDM
    Form-fit insert Anodised aluminium


  • Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or remains locked).

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption Operation 3.5 W @ nominal torque
•     At rest 1 W
•     Wire sizing 6.5 VA
•     Connection Power supply Halogen-free cable 1 m, 2 x 0.75 mm2
•     Signals Halogen-free cable 1 m, 4 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 8 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ
•     Operating range DC 2 ... 10 V
•     Position feedback (measuring voltage U) DC 2 ... 10 V, max. 1 mA
•     Auxiliary supply DC 24 V ±30%, max. 10 mA
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch 0 / 1
•     Direction of motion at Y = 0 V At switch position 0 resp. 1
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Angle of rotation Max. 95° , can be limited at both ends with adjustable
•     mechanical end stops
•     Running time 150 s / 90°
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II totally insulated
•     Degree of protection IP66 + IP67
•     EMC CE according to 2004/108/EC
•     Low-voltage directive CE according to 2006/95/EC
•     Mode of operation Type 1 (EN 60730-1)
•     Rated impulse voltage 2.5 kV (EN 60730-1)
•     Control pollution degree 4 (EN 60730-1)
•     Ambient temperature –30 ... +50°C (actuator with built-in heater –40 ... +50°C)
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity 100% r.H.
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 3
•     Weight Approx. 1.3 kg

Manufacturer Belimo