NM24A - Damper actuator 10 Nm, 150 s, 95° AC / DC 24 V

NM24A - Damper actuator 10 Nm, 150 s, 95° AC / DC 24 V

NM24A-MF-TP - Damper actuator 10 Nm, 150 s adjustable, 95° AC / DC 24 V

NM24A-MF-TP - Damper actuator 10 Nm, 150 s adjustable, 95° AC / DC 24 V

NM24A-MF - Damper actuator 10 Nm, 150 s adjustable, 95°

£146.03 £121.69
On request
SKU
NM24A-MF

NM24A-MF - Damper actuator 10 Nm, 150 s adjustable, 95°

•   AC / DC 24 V, modulating
•   IP 54, Manual override with push-button
•   Control DC 0...10 V (0...32 V adjustable)
•   Operating range DC 2...10 V, 0...32 V adjustable
•   Position feedback DC 2...10 V, 0...10 V,adjustable
•   Connection cable FRNC 1 m
•   Direction of rotation reversible (right/left)
•   Angle of rotation limit. mech.+ elec.
•   Spindle driver universal spindle clamp

Features
 

  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.

  • Parameterisable actuators The factory settings cover the most common applications. Input and output signals and other parameters can be altered with the MFT-H parameterising device or the BELIMO Service Tool, MFT-P.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation with self-resetting pushbutton possible (the gear is disengaged for as long as the button is pressed).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stop. 

  • High operational reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressing the «gear disengagement» switch, the actuator travels to the home position. The actuator then moves into the position defined by the control signal.
More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•     Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•     Power consumption In operation 3.5 W @ nominal torque At rest 2.5 W For wire sizing 5.5
•     Auxiliary switch2 x SPDT, 1 mA ... 3 (0.5) A, AC 250 V(1 x fix 10% / 1 x adjustable 10 ... 90%)
•     ConnectionMotor Cable 1 m, 4 x 0.75 mm2 
•     Functional dataFactory settings
•     Torque (nominal torque)Min. 10 Nm at nominal voltage
•     ControlControl signal Y DC 0 … 10 V, input impedance 100 k Operating range DC 2 … 10 V
•     Position feedback (measuring voltage U)DC 2 … 10 V, max. 0.5 mA
•     Uni-rotation±5%
•     Direction of rotationCan be selected with 0 / 1
•     Direction of motion at Y = 0 VIn switch position 0 or 1
•     Manual overrideDisengaging the gearing latch by meansof a pushbutton, self-resetting
•     Angle of rotationMax. 95°<, can be limited with adjustable mechanical end stop
•     Running time Motor150 s
•     Automatic adjustment of running time,operating range and measuring signal Uto match the mechanical angle of rotationManual triggering of this adaption bypressing the button «Adaption» or withthe PC-Tool
•     Override controlMAX (maximum position) = 100%MIN (minimum position) = 0%ZS (intermediate position, AC only) = 50%
•     Sound power levelMax. 35 dB (A)
•     Safety
•     Protection classIII Safety extra-low voltage
•     Degree of protectionIP54 in all mounting positions
•     EMCCE according to 89/336/EEC 
•     CertificationCertified to IEC/EN 60730-1 and IEC/EN 60730-2-14cULus according to UL 60730-1 and UL 60730-2-14A and CAN/CSA E60730-1:02
•     Mode of operationType 1 (to EN 60730-1)
•     Rated impulse voltage0.8 kV (to EN 60730-1)
•     Control pollution degree3 (in acc. with EN 60730-1)
•     Ambient temperature –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range95% r.H., non-condensating (to EN 60730-1)
•     MaintenanceMaintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 3
•     Weight Approx. 710g



 

Belimo