COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NM24A-TP - Damper actuator 10 Nm, 150 s, 95°

On request
SKU
NM24A-TP
£77.33 £92.80

NM24A-TP - Damper actuator 10 Nm, 150 s, 95°


•    AC / DC 24 V, Open/Close, 3-point
•    IP 54, Manual override with push-button
•    Control with single- / 2-wire contact
•    Connection Screw terminal with cover IP54
•    Position feedback DC 2...10 V
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp


More Information
Description

Features
 


  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied withan anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or detented).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz  DC 24 V
•     Nominal voltage range AC/DC 19.2 ... 28.8 V
•     Power consumption In operation 1.5 W @ nominal torque
•     At rest 0.2 W
•     For wire sizing 4 VA
•     Functional dataTorque (nominal torque)Min. 10 Nm @ nominal voltage
•     Direction of rotationReversible with switch 0 or 1
•     Manual overrideGearing latch disengaged with pushbutton,detentable
•     Angle of rotationMax. 95°, limited on both sidesby means of adjustable, mechanical end stops
•     Running time150 s / 90°
•     Sound power levelMax. 35 dB (A)
•     Position indicationMechanical, pluggable
•     SafetyProtection classIII Safety extra-low voltage
•     Degree of protectionIP54 in any mounting position
•     EMCCE according to 89/336/EEC
•     Mode of operationType 1 (to EN 60730-1)
•     Rated impulse voltage0.8 kV (to EN 60730-1)
•     Control Pollution Degree3 (to EN 60730-1)
•     Ambient temperature range–30 ... +50°C
•     Non-operating temperature–40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•    MaintenanceMaintenance-free
•    Dimensions / WeightDimensionsSee «Dimensions» on page 2
•    WeightApprox. 750 g 

Manufacturer Belimo