COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NM24P-SR - Damper actuator 8 Nm, 150 s, 95°

On request
SKU
NM24P-SR
£210.00 £252.00

NM24P-S - Damper actuator 8 Nm, 150 s adjustable, 95°


•    AC / DC 24 V, modulating
•    IP 66/67, Manual override by means of push-button
•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V, 0...10 V
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp



More Information
Description

Features
 


  • Fields of application The actuator is particularly suited for use in difficult conditions, e.g. in the field of: – Wood drying – Animal breeding – Food processing – Agricultural – Swimming baths / Bathrooms – Rooftop units – General outdoor applications – Changing climate


  • Resistances                                                     Test                            Test standard               Testing body
  •            
  •                                                  Noxious gas tests         EN 60068-2-60                      Fraunhofer Institute ICT / DE           
                                                                 Salt fog spray test         EN 60068-2-52                       Fraunhofer Institute ICT / DE           
                                                                 Ammoniac test              DIN   50916-2                          Fraunhofer Institute ICT / DE           
                                                                 Climatic test                   IEC 60068-2-30                      Trikon Solutions AG / CH           
                                                                 Disinfectants (animals)                                                  Trikon Solutions AG / CH           
                                                                 UV test                             EN 60068-2-5                          Quinel / Zug CH           
                                                                (Solar radiation at ground level)EN 60068-2-63  
                   
  • Used materials                    Actuator parts                                    Material
                                                     Actuator housing                           Polypropylene (PP)
                                                     Cable glands / hollow shaft        Polyamide (PA)
                                                     Connection cable                          FRNC
                                                     Clamp / screws in general         Steel 1.4404
                                                     Seals                                              EPDM
                                                     Form-fit insert                               Anodised aluminium
  •  
  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to theposition defined by the control signal. Measuring voltage U serves for the electrical display of thedamper position 0 ... 100% and as slave control signal for other actuators.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with ananti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual override with pushbutton possible (the gear is disengaged for as long as the button ispressed or remains locked).

     
  •  Adjustable angle of rotation  Adjustable angle of rotation with mechanical end stops. Standard setting 0 ... 90°< .The housing cover must be removed to set the angle of rotation.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•     Nominal voltage range AC 19.2 ... 28.8 V
•     Power consumption In operation 2 W @ nominal torque
•     At rest 0.4 W
•     For wire sizing 4 VA
•     Connection Halogen-free cable 1 m, 4 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 8 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, input impedance 100 k Operating range DC 2 ... 10 V
•     Position feedback (measuring voltage U) DC 2 ... 10 V
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch 0 / 1
•     Direction of motion at Y = 0 V At switch position 0 resp. 1
•     Manual override Gearing latch disengaged with pushbutton, can be locked
•     Angle of rotation Max. 95° , can be limited at both ends with adjustablemechanical end stops
•     Running time 150 s / 90°<
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety  Protection class III Safety extra-low voltage
•     Degree of protection IP66 + IP67
•     EMC CE according to 2004/108/EC
•     Mode of operation Type 1 B(EN 60730-1)
•     Rated impulse voltage 0.8 kV (EN 60730-1)
•     Control pollution degree 4 (EN 60730-1)
•     Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 100% r.H.
•    Maintenance Maintenance-free
•    Dimensions / Weight
•    Dimensions See «Dimensions» on page 3
•    WeightApprox. 1.3 kg 

Manufacturer Belimo