COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NMC24A-MF - Damper actuator 10 Nm, 35 s, adjustable, 95°

On request
SKU
NMC24A-MF
£127.65 £153.18

NMC24A-MF - Damper actuator 10 Nm, 35 s, adjustable, 95°


•    AC / DC 24 V, modulating, MFT
•    IP 54, Manual override with push-button
•    Control DC 0...10 V (0...32 V adjustable)
•    Position feedback DC 2...10 V, 0...10 V,adjustable
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp


More Information
Description

Features
 


  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to theposition defined by the control signal. The measuring voltage U serves for the electrical displayof the damper position 0 ... 100% and as slave control signal for other actuators.

     
  • Parameterisable actuators The factory settings cover the most common applications. Input and output signals and otherparameters can be altered with the MFT-H parameterising device or the BELIMO Service Tool,MFT-P.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with ananti-rotation strap to prevent the actuator from rotating.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.


  • Manual override Manual override with pushbutton possible (the gear is disengaged for as long as the button ispressed or remains locked).


  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.


  • High functional reliability  The actuator is overload-proof, requires no limit switches and automatically stops when the endstop is reached.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressingthe „gear disengagement“ switch, Pos. Direction of rotation switch Home positionY = 0 Left stop1 Y = 0 Right stop the actuator travels to the home position.The actuator then moves into the position defined by the control signal.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz  DC 24 V
•     Nominal voltage range AC/DC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•     Power consumption In operation 4 W @ nominal torque
•     At rest 1.5 W
•     For wire sizing 7 VA
•     Connection Cable 1 m, 4 x 0.75 mm2
•     Functional data Factory settings
•     Torque (nominal torque) Min. 10 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, input impedance 100 kΩ Open-close / 3-point (only AC) ................................Operating range DC 2 ... 10 V
•     Position feedback (measuring voltage U) DC 2 ... 10 V, max. 0.5 mA
•     Position accuracy ± 5%
•     Direction of rotation Reversible with switch 0 / 1
•     Direction of motion at Y = 0 V At switch position 0 resp. 1
•     Manual override Gearing latch disengaged with pushbutton,can be locked
•     Angle of rotation Max. 95° , can be limited at both ends withadjustable mechanical end stops
•     Running time 35 s / 90°
•     Automatic adjustment of running time, operatingrange and measuring signal U to match themechanical angle of rotationManual triggering of the adaption by pressingthe „Adaption“ button or with the PC-Tool
•     Override control MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, only AC) = 50%%
•     Sound power level Max. 55 dB (A)
•     Position indication Mechanical, pluggable
•     Safety 
•    Protection class III Safety extra-low voltage
•    Degree of protection IP54 in any mounting position 
•    EMC CE according to 2004/108/EC 
•    Zertifizierung cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-1:02 and CSA C22.2 No. 24-93certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•   Mode of operation Type 1 (EN 60730-1)
•   Rated impulse voltage 0.8 kV (EN 60730-1)
•   Control pollution degree 3 (EN 60730-1) 
•   Ambient temperature – 30 ... + 50°C
•   Non-operating temperature – 40 ... + 80°C 
•   Ambient humidity 95% RH, non-condensating (EN 60730-1)
•   Maintenance Maintenance-free
•   Dimensions / Weight
•   Dimensions See «Dimensions» on page 4
•   Weight Approx. 870 g

Manufacturer Belimo