COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NR230A - Rotary actuator for control BV 10 Nm

On request
SKU
NR230A
£88.67 £106.40

NR230A - Rotary actuator for control BV 10 Nm


•    AC 230 V, Open/Close, 3-point
•    Running time motor 90 s / 90°
•    IP 54, Manual override temporary, permanent
•    Connection cable length = 1 m
•    Position indicator mechanical

More Information
Description

Features
 


  • Simple direct mounting Straightforward direct mounting on the ball valve with only one screw. The assembly tool is integrated in the plug-on position indicator. The mounting position in relation to the ball valve can be selected in 90° steps.

  • Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz  
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 2.5 W @ nominal torque
•     At rest 0.6 W
•     For wire sizing 5.5 VA
•     ConnectionCable 1 m, 3 x 0.75 mm2
•     Parallel connectionPossible, note performance data
•     Functional dataTorque (nominal torque)Min. 10 Nm @ nominal voltage
•     Manual overrideGearing latch disengaged with pushbutton, can be locked
•     Running time150 s / 90°<
•     Sound power levelMax. 35 dB (A) (without the valve)
•     Position indicationMechanical, pluggable
•     Safety Protection classII totally insulated
•     Degree of protectionIP54 in any mounting position NEMA 2, UL Enclosure Type 2
•     EMC CE according to 2004/108/EC Low-voltage directive CE according to 2006/95/EC
•    CertificationcULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-1:02Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•     Mode of operationType 1
•     Rated impulse voltage 2.5 kV
•     Control Pollution Degree3 
•     Ambient temperature range–0 ... +50°C
•     Media temperature+5 ... +110°C in (control) ball valve–10°C  with stem heating upon request
•     Non-operating temperature–40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating 
•    MaintenanceMaintenance-free
•    Dimensions / WeightDimensionsSee «Dimensions» on page 2
•    WeightApprox. 750 g 

Manufacturer Belimo