COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

AV230-3-R - This has been Phased Out and replaced by the EV230A-RE

On request

AV230-3-R - This has been Phased Out and replaced by the EV230A-RE

•    Linear actuator
•    2000 N, 300 s, 40 mm,
•    AC 230 V, 3-point
•    Control 3-point or Open/Close

More Information


  • Mode of operation The actuator is activated with a 3-point signal.

  • Simple attachment A suitable adapter set ZAV.. is required for mounting the actuator on the third-party valve (see «Accessories»). The adapter set is comprised of a valve neck adapter and a valve stem coupling. The valve neck adapter makes it possible to mount the actuator on the neck of the valve to the bracket with a clamping strap. The actuator spindle is coupled to the valve stem with the valve stem coupling. The actuator can be rotated through 360° on the neck of the valve.

  • Manual override The stroke can be adjusted in a voltage-free state by using a hexagonal key (5 mm), which is plugged into the actuator at the top. If the hexagonal key is turned in a clockwise direction, then the actuator spindle will extend from the actuator housing (pushing) and maintain the position until a nominal voltage is applied (the controller has first priority).

  • High functional reliability The actuator is protected against short circuits, polarity reversal and overloading.
  • Function indication The stroke is indicated mechanically on the bracket. The indicator adjusts itself automatically.

  • Combination valve/actuator Refer to the valve documentation for suitable BELIMO valves, their permitted media temperatures and closing pressures. The retrofit actuator AV..-R is provided for third-party valves.
Manuals & Datasheets
Technical Information

•    Technical data Nominal voltage AC 230 V, 50/60 Hz
•    Nominal voltage range AC 198 ... 264 V
•    Power consumption In operation For wire sizing 5.5 W @ nominal force 15 VA
•    Connection Cable 1 m, 3 x 0.75 mm2
•    Parallel connection Yes (note performance data for supply!)
•    Functional data Actuating force Closing force Inhibiting force 2000 N 1700 N
•    Manual override With hexagonal key, temporary
•    Nominal stroke 40 mm
•    Actuating time 7.5 s/mm or 3.75 s/mm, selectable
•    Sound power level Max. 35 dB (A)
•    Protection class II Totally insulated
•    Degree of protection IP54
•    EMC Low-voltage directive CE according to 2004/108/EC CE according to 2006/95/EC
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 4 kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature 0 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance-free

Manufacturer Belimo