COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

AVY24-MFT-R - This Product has been Phased Out and replaced by EVC24A-MF-RE

On request
SKU
AVY24-MFT-R

AVY24-MFT-R - This Product has been Phased Out and replaced by EVC24A-MF-RE


This product is now OBSOLETE and is no longer available. This Actuator has been replaced by EVC24A-MF-RE. For the C105 End Switches, you will also need to add on theS2A-H accessory.



•    Linear actuator, retrofit
•    2500 N, 75 s adjustable, 50 mm,,
•    AC / DC 24 V, modulating, MFT
•    Control DC 0...10 V (0...32 V)
•    Operating range DC 0.5...10 V, adjustable
•    Position feedback DC 0.5...10 V, adjustable

More Information
Description

Features

  • Mode of operation The actuator is activated with a standard modulating signal DC 0 ... 10 V.

  • Simple attachment A suitable adapter set ZAV.. is required for mounting the actuator on the third-party valve (see «Accessories»). The adapter set is comprised of a valve neck adapter and a valve stem coupling. The valve neck adapter makes it possible to mount the actuator on the neck of the valve to the bracket with a clamping strap. The actuator spindle is coupled to the valve stem with the valve stem coupling. The actuator can be rotated through 360° on the neck of the valve.

  • Manual override The stroke can be adjusted in a voltage-free state by using a hexagonal key (5 mm), which is plugged into the actuator at the top. If the hexagonal key is turned in a clockwise direction, then the actuator spindle will extend from the actuator housing (pushing) and maintain the position until a nominal voltage is applied (the controller has first priority).

  • High functional reliability The actuator is protected against short circuits, polarity reversal and overloading. The stroke is adapted automatically.
  • Function indication The stroke is indicated mechanically on the bracket. The indicator adjusts itself automatically. A two-coloured LED status display is located below the cover of the housing.

  • Combination valve/actuator Refer to the valve documentation for suitable BELIMO valves, their permitted media temperatures and closing pressures. The retrofit actuator AV..-R is provided for third-party valves.

  • Auxiliary switch The AVY24-MFT-R-C105 actuator is equipped with an auxiliary switch for interrupting the supply voltage.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Technical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•    Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•    Power consumption In operation For wire sizing 6 W @ nominal force 12 VA
•    Connection Cable Cable 1 m, 5 x 0.75 mm2
•    Parallel connection Yes (note performance data for supply!)
•    Functional data Actuating force Closing force Inhibiting force 2500 N 1700 N
•    Control Control signal Y Operating range DC 0 ... 10 V, input impedance 100 k.. DC 2 ... 10 V
•    Position feedback (Measuring voltage) DC 2 ... 10 V, max. 0.5 mA
•    Actuating time 7.5 s/mm or 3.75 s/mm, selectable
•    Position accuracy ±5%
•    Manual override With hexagonal key, temporary
•    Nominal stroke 50 mm
•    Running time 75 s
•    Sound power level Max. 45 dB (A)
•    Position indication mechanical 8 … 50 mm stroke
•    Protection class III Safety extra-low voltage
•    Degree of protection IP54
•    EMC CE according to 2004/108/EC
•    Rated impulse voltage 0.33 kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature 0 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance-free

Manufacturer Belimo