AX-MPR1-9-Single Phase 9.0kW Thyristor

AX-MPR1-9 - Single Phase 9.0kW Thyristor

AX-MPR3-6 - Three Phase 6kW Thyristor

AX-MPR3-6 - Three Phase 6kW Thyristor

AX-MPR1-2-RL - Single Phase 2kW Raise/Lower Thyristor

£61.92 £51.60
On request

AX-MPR1-2-RL - Single Phase 2kW Raise/Lower Thyristor Features:

  • 24Vac Raise/Lower Input
  • No additional heatsinks required
  • PWM Control
  • 230Vac input from load
  • DIN Rail (TS35) Mounting
  • LED Indication

AX-MPR1-2-RL - Single Phase 2kW Raise/Lower Thyristor:

The AX-MPR1-2-RL DIN Rail Power Regulator is designed to operate from the output of a raise lower valve controller. The normal Raise/Lower (valve open/close) signal is converted to a pulse width modulated output for an electric heater. The AX-MPR1-2-RL is intended to operate with a 2.5 minute signal from fully closed to fully open; the output tracks the inputs in a linear fashion, automatically calibrating each time the minimum or maximum extremes are met. The output to the electric heater is controlled by solid-state switching with “zero crossing” technology to reduce RFI problems and provide accurate switching control. The AX-MPR1-2-RL features LED indication of Output On.

More Information
Manuals & Datasheets
Technical Information
  • Input: 24Vac Raise/Lower Input
  • Power Supply: 230Vac (from load input)
  • Max Heater Duty: See Overleaf
  • Rated Load: See Overleaf
  • Rated Supply: 220-255Vac / 50-60Hz
  • LED Indication: ON when output is on.
  • Dissipated Heat: See Overleaf
  • Terminals-Control: Rising Clamp for 0.5-2.5mm2 Cable
  • Terminals-Power: Rising Clamp for 1.5mm2 Stranded or 2.5mm2 Solid Core Cable
  • Ambient Temp. Range: AX-MPR-1-2-RL: 0 to 55°C Note; The units are rated at 30°C. If using at higher ambient temperature de-rate the units by 10% for every 5°C above 30°C.
  • Country of Origin: United Kingdom