R6150W320-S8 - 2-way characterised control valve (CCV), PN16

On request
£1,436.67 £1,724.00

R6150W320-S8 2-way characterised control valve (CCV), PN16

•    flange, DN 150, kvs 320
•    Housing Gray Cast Iron
•    Valve disk stainless steel
•    Seal PTFE / EPDM O-ring
•    Temperature of medium +2...+120° C
•    Leakage rate A-AB air bubble-tight EN 12266



More Information



  • Mode of operation The characterized control valve is operated by a rotary actuator. The actuator is controlled by a standard modulating or 3-point control system and moves the ball of the valve – the throttling device – to the opening position dictated by the control signal. Open the ball valve counterclockwise and close it clockwise.

  • Flow characteristic Equal-percentage characteristic of the flow rate ensured by the integral characterizing disc.
Manuals & Datasheets
Technical Information

•     Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
•     Temperature of medium +5°C ... +120°C (–10 .... +5°C on request)
•     Rated pressure ps see «Type overview»
•     Flow characteristic Control path A – AB: equal percentage (to VDI/VDE 2178) n(gl): see «Type overview»
•     Rangeability Sv See «Type overview»
•     Leakage rate A: air bubble-tight (to EN12266-1)
•     Pipe connector Flange PN 16 (to EN 1092/1)
•     Differential pressure Δpvmax 400 kPa, Closing pressure Δps 600 kPa
•     Angle of rotation 90°<) (Operating range 15 ... 90°<)
•     Installation position Upright to horizontal (in relation to the stem)
•     Maintenance Maintenance-free
•     Materials Fitting EN-JL1040 (GG25 paint)
•     Valve ball Stainless steel AISI 316
•     Stem Stainless steel AISI 304
•     Stem seal EPDM Perox
•     Ball seat PTFE
•     Characterizing disk Stainless steel
•     Dimensions / Weights see «Dimensions and weights», page 3
•     Motorizing see the complete overview of water solutions

Manufacturer Belimo