SM24A-MF-TP - Damper actuator 20 Nm, 150 s adjustable, 95° AC / DC 24 V

On request
SKU
SM24A-MF-TP
£135.13 £162.16

SM24A-MF - Damper actuator 20 Nm, 150 s adjustable, 95° AC / DC 24 V

•    IP 54 Manual override with push-button
•    Control 0...20 mA
•    Operating range 4...20 mA
•    Position feedback DC 2...10 V
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mech.+ elec.

More Information
Description

Features
 

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or detented).

  • Adjustable angle of rotation  Adjustable angle of rotation with mechanical end stops.

  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal.  Measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.

  • Parameterisable actuators The factory settings cover the most common applications. The output signal and other parameters can be altered with the MFT-H parameterising device or the BELIMO Service Tool, MFT-P.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressing the «gear disengagement» switch, the actuator travels to the home position.
    The actuator then moves into the position defined by the control signal.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•     Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•     Power consumption In operation 3.5 W @ nominal torque
•     At rest 1.25 W
•     For wire sizing 6 VA
•     Connection Cable 1 m, 4 x 0.75 mm2
•     Control Control signal Y 0 ... 20 mA, input impedance 500 Working range 4 ... 20 mA
•     Position feedback (measuring voltage U) DC 2 ... 10 V, max. 0.5 mA
•     Uni-rotation ±5%
•     Functional data Torque (nominal torque) Min. 20 Nm @ nominal voltage
•     Direction of rotation Can be selected with 0 / 1
•     Manual override Disengaging the gearing latch by means of a pushbutton, self-resetting
•     Angle of rotation Max. 95° , can be limited at both ends withadjustable mechanical end stops
•     Running time 150 s / 90°<
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Automatic adjustment of running time, operating range and measuring signal U to match the mechanical angle of rotation Manual triggering of this adaption by
pressing the button «Adaption» or with the PC-Tool
•     Direction of motion at Y = 0 V At switch position 0 resp. 1
•     Protection class III Safety extra-low voltage
•     Degree of protection IP54 in all mounting positions
•    EMC CE according to 2004/108/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02 Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operation Type 1
•    Rated impulse voltage 0.8 kV
•    Control pollution degree 3
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H.
•    Maintenance Maintenance-free
•    Dimensions / Weight
•    Dimensions See «Dimensions» on page 5
•    WeightApprox. 920 g 

Manufacturer Belimo