COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

CM230-L Damper actuator 2 Nm, 75 s, AC 230 V, Open/Close

On request
SKU
CM230-L
£55.33 £66.40

CM230-L Damper actuator 2 Nm, 75 s, AC 230 V, Open/Close

•    Damper actuator
•    2 Nm, 75 s,
•    AC 230 V, Open/Close, 3-point
•    IP 54, Manual override Gear disengagement with magnet
•    Control with single- / 2-wire contact
•    Connection PVC cable 1m
•    Direction of rotation rotation to the left (ccw)
•    Angle of rotation limit. mechanical integral

More Information
Description

Features

  • Simple direct mounting on the damper spindle with a universal spindle clamp (6 ... 12.7 mm). The actuator is then secured with the anti-rotation strap supplied, to prevent it from rotating.

  • Manual override with magnet possible (the gear is disengaged as long as the magnet adheres to the symbol U). The magnet for gear disengagement is integrated in the position indicator.

  • Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Nominal voltage AC 100 ... 240 V, 50/60 Hz
•    Nominal voltage range AC 85 ... 265 V
•    Power consumption In operation At rest For wire sizing    1.5 W @ nominal torque 1 W 3 VA
•    Connection Cable 1 m, 3 x 0.75 mm2
•    Functional data    Torque (nominal torque) Min. 2 Nm @ nominal voltage
•    Direction of rotation See «Type overview»
•    Manual override Gear disengagement with magnet
•    Angle of rotation Without limit With limit Endless Fixed 315° or 0 ... 287.5° with mechanical end stops, can be adjusted in 2.5° increments
•    Running time 75 s / 90°
•    Sound power level Max. 35 dB (A)
•    Position indicator Mechanical, pluggable (with integrated magnet for gear disengagement)
•    Safety    Protection class II totally insulated
•    Degree of protection IP54 in any mounting position NEMA2, UL Enclosure Type 2
•    EMC Low voltage directive CE according to 2004/108/EC CE according to 2006/95/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02 Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 2.5 kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-conde
•    Maintenance – free

Manufacturer Belimo