COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

DGR230A-7 - This Product has been Phased Out and replaced by the DR230A-7

On request
SKU
DGR230A-7

DGR230A-7 - This Product has been Phased Out and replaced by the DR230A-7 



•     DGR230A-7 Rotary actuator 60 Nm
•     AC 230 V, Open/Close
•     Running time motor 150 s / 95°
•     IP 54, Manual override temporary, permanent
•     Connection PVC cable 1m
•     Direction of rotation reversible (right/left)




More Information
Description

Features

  • Application The actuator is used in combination with the BELIMO butterfly valve D6 or other dampers withthe following mechanical specifications:
    – Square stem head (17 mm) for form-fit attachment of the rotary actuator
    – Hole circle (d = 70 mm) for assembly with the butterfly valve
    Adapters for other stem head dimensions on request.

  • Simple direct mounting Straightforward direct mounting on the butterfly valve with ISO 5211- F05 assembly flange.
    The mounting position in relation to the butterfly valve can be selected in 90° steps.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•    Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•    Power consumption In operation 11 W @ nominal torque
•    At rest <3 W
•    For wire sizing <=21 VA (lmax 20 A @ 5 ms)
•    Connection Cable 1 m, 4 x 0.75 mm2
•    Parallel operation Yes (note the performance data)
•    Functional data Factory settings Variable Setting
•    Torque >=40 Nm
•    Inhibiting torque >=40 Nm
•    Control Control signal Y DC 0 … 10 V, input impedance 100 k ohm
•    Operating range DC 0.5 ... 10 V
•    Position feedback (Measuring voltage U) DC 0.5 ... 10 V, max. 0.5 mA
•    Setting emergency position (POP) 0% (POP rotary button end stop, left)
•    Bridging time (PF) 2 s
•    Position accuracy ±5%
•    Direction of rotation Motor As an option with clockwise or anticlockwise
•    Emergency setting position Reversible with switch 0 ... 100%
•    Direction of rotation Y = 0 V At switch position 1 or 0 , respectively
•    Manual override Gearing latch disengaged with push button
•    Angle of rotation Max. 95° , can be limited at both ends with adjustable mechanical end stops
•    Running time Standard operation 150 s / 90°
•    Emergency setting position 35 s @ 0 ... 50°C
•    Automatic adjustment of running time, operating range and measuring signal U to match the mechanical angle of rotation - Manual triggering of the adaption by pressing the «Adaption» button
•    Override control MAX (maximum position) = 100%
•    MIN (minimum position) = 0%
•    ZS (intermediate position, only AC) = 50%
•    Sound power level Standard operation <=53 dB (A) @ 90 s running time, <=52 dB (A) @ 150 s running time
•    Emergency setting position =61 dB (A)
•    Position indication Mechanical, pluggable
•    Safety Protection class III Safety extra-low voltage UL Class 2 Supply
•    Degree of protection IP54 NEMA 2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02
•    Mode of operation Type 1.AA
•    Rated impulse voltage 0.8 kV
•    Control pollution degree 3
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.h., non-condensating
•    Maintenance Maintenance-free
•    Dimensions See «Dimensions» on page 7
•    Weight Approx. 1.8 kg

Manufacturer Belimo