COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

DGR24A-7 - This Product has been Phased Out and replaced by DR24A-7

On request

DGR24A-7 - This Product has been Phased Out and replaced by DR24A-7

•    Open/Close

•    Running time motor 150 s / 95°
•    IP 54, Manual override temporary, permanent
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)

More Information

DGR24A-7 - This Product has been Phased Out and replaced by DR24A-7


    • Application The actuator is used in combination with the BELIMO butterfly valve D6 or other dampers withthe following mechanical specifications:
      – Square stem head (17 mm) for form-fit attachment of the rotary actuator
      – Hole circle (d = 70 mm) for assembly with the butterfly valve
      Adapters for other stem head dimensions on request.

    • Simple direct mounting Straightforward direct mounting on the butterfly valve with ISO 5211- F05 assembly flange.
      The mounting position in relation to the butterfly valve can be selected in 90° steps.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when theend stop is reached.
Manuals & Datasheets
Technical Information

•    Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz DC 24V
•    Power supply range AC/DC 19.2 ... 28.8 V
•    Power consumption In operation 8 W at nominal torque
•    At rest 4 W
•    For wire sizing 12 VA
•    Connection 2 cables 1 m, 3 x 0,75 mm2
•    Parallel connection Possible, note performance data
•    Functional data Torque (nominal torque) Min. 60 Nm at nominal voltage
•    Manual override Gearing latch disengaged with pushbutton (temporary / permanent)
•    Running time 150 s / 90°<)
•    Noise level Max. 45 dB (A) (without the valve)
•    Position indication Mechanical, add-on
•    Safety Protection class II Totally insulated
•    Degree of protection IP54 in any mounting position
•    EMC CE according to 89/336/EEC
•    Low voltage directive CE according to 2006/95/EC
•    Mode of operation Type 1 (to EN 60730-1)
•    Rated impulse voltage 0.8 kV (to EN 60730-1)
•    Control pollution degre 3 (to EN 60730-1)
•    Ambient temperature range 0 ... +50°C
•    Media temperature –20 ... +100° in butterfly valve
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
•    Maintenance Maintenance-free

Manufacturer Belimo