EVBAT00200 - Battery charger and step-up module for EVD0000400

On request
SKU
EVBAT00200
£82.47 £98.96

The EVBAT00200 battery module (Fig. 1) is an electronic device made by CAREL which guarantees the power supply to the EVD000400 driver in the case of a sudden power failure. Powered by a common 12 V lead battery, it supplies 21 Vdc to the driver for the time required to close the controlled electronic valve

More Information
Description

Warning: For maximum life, the battery should be installed in a site where the temperature remains below 40 °C.

Note: • the complete EVBAT00300 system is also available (Fig. 2), made up of: one EVBAT00200 module, one 59C545A003 cable and two 6436503AXX batteries; • an optional battery module box frame is available, CAREL code EVBATBOX10 (see Fig. 3)

Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

Battery charger

power supply 24 Vac ±15 %
max battery charge current 150 mA
max battery charge voltage 13 V
battery used 12 V sealed Pb, 2 to 6 Ah
charging time 1 hour for each closing action lasting 70 s
protectors short-circuit, battery polarity inversion

Step-up

operating time  <10 ms
power supply duration (fixed) 70s
output voltage 20 Vdc ±5 %
max. output current 1 A
protectors

 - overload 3 A: with reduction of VOUT
- short-circuit: disconnect VOUT within 300 ms
- UVLO battery: disconnect VOUT if VBAT <10.5 V 

Battery 

composition two 6 V 1.2 Ah batteries
wiring 6 way minifit connector with fuses and 2 m 30 cable (see picture 2 above)

STORAGE AND INSTALLATION SPECIFICATIONS

operating conditions  -10T60 ˚C, < 90% r.H. non condensing
storage conditions 20T70 ˚C, < 90% r.H. non condensing
Index of protection IP20 
lead size 0.5 to 2.5 mm2
PTI of insulation materials 250 V
classification according to protection against electric shock to be integrated in Class I and/or II devices
environmental pollution normal
category of resistance to heat and fire category D
immunity against voltage surges category 1
temperature limits of the surfaces as per operating conditions
mounting on DIN rail
disposal of the product the module is made from metal parts and plastic parts. To dispose of the device, observe the environmental protection laws in force in your country. The lead batteries must be disposed of by delivering them to specialist collection centres.
Manufacturer Carel