FCPM082010 - Stand Alone fan speed controller

FCPM082A10 - Fan speed controller - SLAVE Board, single phase 8 A 230 Vac, IP54

FCPM00A02K - Fan speed controller KIT

FCPM00A02K - Fan speed controller KIT, with 45 Bar pressure transducer and 2 meter Packard connection cable

FCPM00A01K - Fan speed controller KIT, with 34.2 Bar pressure transducer and 2 meter packard connection cable

£451.54 £376.28
On request

Fan speed controller KIT, with 34.2 Bar pressure transducer and 2 meter Packard connection cable.

The KIT is made of:

Qty. 1 FCPM082010 - Stand Alone fan speed controller,
Power supply: Single phase 230 Vac
Index of protection: IP54
Frequency: 50/60 Hz
Maximum output current: 8 A

Qty. 1 SPKT00B6R0 34.2 Bar Pressure transducer -
Power supply: 4.5 to 5.5 Vdc
Type: Ratiometric
Index of protection: IP65

Qty. 1 SPKC002310 Packard connector for SPKT pressure transducers  
Length: 2m
Index of protection: IP67

FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.

This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection.It can control single-phase electric motors, with a load of up to 8 A/230 Vac. 

Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
More Information
Manuals & Datasheets
Technical Information




Power Supply

230 Vac (-15% to +10%), 50/60 Hz with autosensing


8A max. 0 to 230 Vac

Analog inputs

ratiometric type 0 to 5 Vdc, 8 mA or NTC

Operating conditions

-20T50 °C, <85% rH non-condensing

Storage conditions

-20T70 °C, <85% rH non-condensing

Index of protection