COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

FCPM00A02K - Fan speed controller KIT, with 45 Bar pressure transducer and 2 meter Packard connection cable

On request
£225.77 £270.92
Fan speed controller KIT, with 45 Bar pressure transducer and 2 meter Packard connection cable.

The KIT is made of:

Qty. 1 FCPM082010 - Stand Alone fan speed controller,
Power supply: Single phase 230 Vac
Index of protection: IP54
Frequency: 50/60 Hz
Maximum output current: 8 A

Qty. 1 SPKT00B6R0 45 Bar Pressure transducer -
Power supply: 4.5 to 5.5 Vdc
Type: Ratiometric
Index of protection: IP65

Qty. 1 SPKC002310 Packard connector for SPKT pressure transducers  
Length: 2m
Index of protection: IP67

More Information
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.

This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection.It can control single-phase electric motors, with a load of up to 8 A/230 Vac. 

Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
Manuals & Datasheets
Technical Information




Power Supply

230 Vac (-15% to +10%), 50/60 Hz with autosensing


8A max. 0 to 230 Vac

Analog inputs

ratiometric type 0 to 5 Vdc, 8 mA or NTC

Operating conditions

-20T50 °C, <85% rH non-condensing

Storage conditions

-20T70 °C, <85% rH non-condensing

Index of protection



Manufacturer Carel