COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

FCPM082010 - Stand Alone fan speed controller, single phase 8 A 230 Vac, IP54, Master/Slave version

Only 1 left
In stock
SKU
FCPM082010
£177.82 £213.38

Stand Alone fan speed controller Master/Slave version.


Technical specifications:
Power supply: 230 V Single-phase
Frequency: 50/60 Hz
Maximum output current: 8 A 
Index of protection: IP54
Dimensions: 140x135x90 mm
Analogue input: Ratiometric 0 to 5 Vdc, 8 mA or NTC
Replaces FCPM082000, now obsolete
More Information
Description
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.

This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection. It can control single-phase electric motors, with a load of up to 8 A/230 Vac.

Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).
Manuals & Datasheets
 MANUAL   DATA-SHEET   BROCHURE 
Manual DATASHEET BROCHURE
Technical Information

TECHNICAL FEATURES

 

 

Power Supply

230 Vac (-15% to +10%), 50/60 Hz with autosensing

Output

8A max. 0 to 230 Vac

Analog inputs

ratiometric type 0 to 5 Vdc, 8 mA or NTC

Operating conditions

-20T50 °C, <85% rH non-condensing

Storage conditions

-20T70 °C, <85% rH non-condensing

Index of protection

IP54

 

Manufacturer Carel