FCPM082A10 - Fan speed controller - SLAVE Board, single phase 8 A 230 Vac, IP54

On request
£124.36 £149.23
Fan speed controller power version only (SLAVE). This module is designed to work in conjunction with the MASTER board FCPM082010
Technical specifications:
Power supply: 230 V Single-phase
Frequency: 50/60 Hz
Maximum output current: 8 A 
Index of protection: IP54
Dimensions: 140x135x90 mm
Analogue input: This device is fitted with just one control input (Y1-GND) and the power circuit. It can be used in combination with an FCPM082010 (or other similar CAREL controller) to increase the power available
More Information
Manuals & Datasheets
Technical Information




Power Supply

230 Vac (-15% to +10%), 50/60 Hz with autosensing


8A max. 0 to 230 Vac

Analog inputs

ratiometric type 0 to 5 Vdc, 8 mA or NTC

Operating conditions

-20T50 °C, <85% rH non-condensing

Storage conditions

-20T70 °C, <85% rH non-condensing

Index of protection



Manufacturer Carel
FCP is a speed controller for single-phase fans on stand-alone units with up to two circuits. It controls the fan speed according to the variation in pressure in the condenser circuit, so as to maintain the set point, via a 0 to 5 V signal from the ratiometric pressure transducer (SPKT*R0) positioned in the water circuit.

This device is used for air-conditioning and refrigeration applications, and is installed directly on the condensing unit, thanks to the case with IP54 index of protection. It can control single-phase electric motors, with a load of up to 8 A/230 Vac.

Available in the Master/Slave or power version (as for the current MCHRTF80A0, in the IP54 version).