FLSTDmFC0A - pCO Rack Controller Software

FLSTDmFC0A - pCO Rack Controller Software









Main functions
• control of compressor suction pressure;
• control of condensing pressure (compressor discharge);
• possibility to manage up to 2 pCO boards via pLAN;
• management, depending on the number of outputs available, of up to six compressors, with a maximum of three load steps (for a total of four outputs for each compressor), or alternatively up to 12 compressors without load steps and with one safety device for each compressor, and up to six condenser fans;
• variable condensing and evaporation pressure set points depending on the outside conditions (PGD0 only);
• complete alarm management and saving to log;
• time band settings with set point variation;
• connection to supervisor/ telemaintenance serial line via analogue or GSM modem;
• transmission of SMS messages to cellular phones.
Devices controlled:
• compressors;
• condenser fans;
• auxiliary pump.

Programming:
• display and control of the values measured, via external LCD, PGD0 or built-in terminal;
• three levels of parameter protection;
• multi-language management: English, Italian, French, German, Spanish, Russian (PGD0 only, see paragraph 2.4);
• possibility to configure all the unit parameters using a hardware key;
• possibility to configure the main unit parameters via serial line.



If you download and install this software on a Carel Controller you agree by default to the disclaimer found on this link.

SKU: FLSTDmFC0A

Product Description

Details

COMPATIBLE HARDWARE - standard software for Air Handling Units

pCO1 

X

pCO2

 

pCO3

X

pCOxs (only 1+1 Mbyte version)

X

pCOC


pCOB


 

Manuals & Datasheets

Manuals & Datasheets

Manuals & Datasheets
 MANUAL   BROCHURE 
ManualBrochure
Technical InformationNo
ManufacturerCarel

Reviews