GM24A - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close

GM24A - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close

GM24A-MF - Damper actuator 40 Nm, 150 s adjustable, 95° AC / DC 24 V, modulating

GM24A-MF - Damper actuator 40 Nm, 150 s adjustable, 95° AC / DC 24 V, modulating

GK24A-1 - CPO actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close

£380.80 £317.33
On request

GK24A-1 - CPO actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close


•    Running time emergency setting position 35 s
•    Power-Off-Position adjustable
•    IP 54, Manual override with push-button
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp



  • Mode of operation The actuator moves the damper to the operating position at the same time as tensioning the return spring. The damper is turned back to the emergency position by spring force if the supply voltage is interrupted.

  • Pre-charging time (start up) The capacitor actuators require a pre-charging time. This time is used for charging the capacitors up to a usable voltage level. This ensures that, in the event of an electricity interruption, the actuator can be moved at any time from its current position into the preset emergency setting position (POP).
    The duration of the pre-charging time depends mainly on how long the power was interrupted.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with ananti-rotation strap to prevent the
    actuator from rotating.

  • Delivery condition (capacitors) The actuator is completely discharged after delivery from the factory, which is why the actuator requires approximately 20 s pre-charging time before initial commissioning in order to bring the capacitors up to the required voltage level.

  • Manual override Manual operation of the damper with the hand crank, locking in any position with the interlocking switch.
  • High operational reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

  • Home position / Start The spindle clamp of the actuator is set ex-works to 0°. eingestellt.
    After the supply voltage has been applied, the actuator moves into the selected position.

  • Direction of rotation switch When actuated, the direction of rotation switch changes the running direction in normal operation.
    The direction of rotation switch has no influence on the emergency setting position (POP) which has been set.

  • Emergency setting position (POP)rotary button The «Emergency setting position» rotary button can be used to adjust the desired emergency setting position (POP). The POP range is in reference to the maximum angle of rotation of the actuator.
    The rotary button is always in reference to an angle of rotation of 95° and does not take into consideration any end stops which were set retroactively.
    In the event of an voltage interruption, the actuator will move into the selected emergency setting position, taking into account the bridging time (PF) of 2 s which was set ex-works.
More Information
Manuals & Datasheets
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•    Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•    Power consumption In operation 11 W @ nominal torque
•    At rest <3 W
•    For wire sizing =21 VA
•    Connection Cable 1 m, 3 x 0.75 mm2
•    Parallel operation Yes (note the performance data)
•    Functional data Torque >=40 Nm
•    Inhibiting torque >=40 Nm
•    Setting emergency position (POP) 0 ... 100%, adjustable (POP rotary button) of maximum angle of rotation
•    Bridging time with voltage interruption 2 s
•    Position accuracy ±5%
•    Direction of rotation Motor Reversible with switch
•    Emergency setting position Reversible with switch 0 ... 100%
•    Direction of rotation At switch position 1 or 0, respectively
•    Manual override Gearing latch disengaged with push button
•    Angle of rotation Max. 95°, can be limited at both ends with adjustable mechanical end stops
•    Running time Motor 150 s / 90°
•    Emergency setting position 35 s @ 0 ... 50°C
•    Sound power level Motor =53 dB (A) @ 90 s running time =52 dB (A) @ 150 s running time
•    Emergency setting position =61 dB (A)
•    Position indication Mechanical, pluggable
•    Safety Protection class III Safety extra-low voltage UL Class 2 Supply
•    Degree of protection IP54 NEMA 2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02
•    Mode of operation Type 1.AA
•    Rated impulse voltage 0.8 kV
•    Control pollution degree 3
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.h., non-condensating
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 4
•    Weight Approx. 1.8 kg