GM24A-MF - Damper actuator 40 Nm, 150 s adjustable, 95° AC / DC 24 V, modulating

On request
SKU
GM24A-MF
£201.39 £241.67

GM24A-MF - Damper actuator 40 Nm, 150 s adjustable, 95° AC / DC 24 V, modulating

•    IP 54, Manual override with push-button
•    Control DC 0...10 V (0...32 V adjustable)
•    Operating range DC 2...10 V, 0...32 V adjustable
•    Position feedback DC 2...10 V, 0...10 V,adjustable
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mech.+ elec.

More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data
•    Nominal voltage range AC 24 V, 50/60 Hz / DC 24 V
•    Power supply rangeAC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•    Power consumption in operation 4.5 W at nominal torque
•    At rest 1.5 W
•    For wire sizing 7 VA
•    Connection Cable 1 m, 4 x 0.75 mm2
•    Functional data Factory settings
•    Torque (nominal torque) Min. 40 Nm at nominal voltage
•    Control Control signal Y DC 0 ... 10 V, input impedance 100 kΩ
•    Working range DC 2 ... 10 V
•    Position feedback (measuring voltage U) DC 2 ... 10 V, max. 0.5 mA
•    Uni-rotation ±5%
•    Direction of rotation Can be selected with 0 / 1
•    Direction of motion at Y = 0 V In switch position 0
•    Manual override Disengaging the gearing latch by means of a pushbutton, self-resetting
•    Angle of rotation
•    Max. 95°, can be limited at both ends with mechanical adjustable end stops
•    Running time 150 s
•    Automatic adjustment of running time, operating range and measuring signal U to match the mechanical angle of rotation Manual triggering of this adaption by         pressing the button «Adaption» or withthe PC-Tool
•    Override control MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, only AC) = 50%
•    Sound power level Max. 45 dB (A)
•    Position indication Mechanical, plug-on
•    Protection class III Safety extra-low voltage
•    Degree of protection IP54 in all mounting positions
•    EMC CE according to 89/336/EEC
•    Mode of operation Type 1 (to EN 60730-1)
•    Control pollution degree 3 (in acc. with EN 60730-1)
•    Ambient temperature range –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions See «Dimensions» on page 5
•    Weight Approx. 1720 g

Manufacturer Belimo
Description

Features

 

  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.

  • Parameterisable actuators The factory settings cover the most common applications. Input and output signals and other parameters can be altered with the MFT-H parameterising device or the BELIMO Service Tool, MFT-P.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation with self-resetting pushbutton possible (the gear is disengaged for as long as the button is pressed).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressing the «gear disengagement» switch, the actuator travels to the home position.