GM24A-SR-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, modulating IP 54, Manual override with push-button

GM24A-SR-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, modulating IP 54, Manual override with push-button


•    Control DC 0...10 V
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Connection terminals IP54
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp

On request
SKU
GM24A-SR-TP
£216.80 £180.67

Features


 



  • Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the damper position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.


  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.


  • Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).


  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.


  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.



More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Nominal voltage range AC/DC 19.2 ... 28.8 V
•    Power consumption In operation 4.5 W @ nominal torque
•    At rest 2 W
•    For wire sizing 6.5 VA
•    Connection Cable 1 m, 4 x 0.75 mm2
•    Functional data Torque (nominal torque) Min. 40 Nm @ nominal voltage
•    Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kO
•    Operating range DC 2 ... 10 V
•    Position feedback (Measuring voltage U) DC 2 ... 10 V, max. 1 mA
•    Posotion accuracy ±5%
•    Direction of rotation Reversible with switch 0 / 1
•    Direction of rotation at Y = 0 V bei Schalterstellung 0 or 1
•    Manual override Gearing latch disengaged with pushbutton, detentable
•    Angle of rotation Max. 95°, limited on both sides by means of adjustable, mechanical end stops
•    Running time 150 s / 90°
•    Sound power level Max. 45 dB (A)
•    Position indication Mechanical, pluggable
•    Protection classIII Safety extra-low voltage
•    Degree of protection IP54 in any mounting position NEMA2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-01:02Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 0.8kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    Weight Approx. 1.7 kg

Manufacturer Belimo