GM24A-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close IP 54, Manual override with push-button

GM24A-TP - Damper actuator 40 Nm, 150 s, 95° AC / DC 24 V, Open/Close IP 54, Manual override with push-button


•    Control with single- / 2-wire contact
•    Connection terminals IP54
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp

On request
SKU
GM24A-TP
£180.00 £150.00

Features
 



  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.


  • Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).


  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.


  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.



More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
•    Nominal voltage range AC/DC 19.2 ... 28.8 V
•    Power consumption In operation 4 W @ nominal torque
•    At rest 2 W
•    For wire sizing 6 VA
•    Connection Terminals 4 mm2 (Kabel Ø 4 ... 10 mm, three-core)
•    Functional data Torque (nominal torque) Min. 40 Nm @ nominal voltage
•    Direction of rotation Reversible with switch 0 / 1
•    Manual override Gearing latch disengaged with pushbutton, detentable
•    Angle of rotation Max. 95°, limited on both sides by means of adjustable, mechanical end stops
•    Running time 150 s / 90°
•    Sound power level Max. 45 dB (A)
•    Position indication Mechanical, pluggable
•    Protection classIII Safety extra-low voltage
•    Degree of protection IP54 in any mounting position NEMA2, UL Enclosure Type 2
•    EMC CE according to 2004/108/EC
•    Certification cULus according to UL 60730-1A and UL 60730-2-14and CAN/CSA E60730-01:02Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
•    Mode of operation Type 1 (EN 60730-1)
•    Rated impulse voltage 0.8kV (EN 60730-1)
•    Control pollution degree 3 (EN 60730-1)
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 95% r.H., non-condensating (EN 60730-1)
•    Maintenance Maintenance-free
•    Dimensions / Weight Dimensions See «Dimensions» on page 2
•    Weight Approx. 1.7 kg

Manufacturer Belimo