GM24G-SR-T - Damper actuator NEMA4 40 Nm, 150 s / 90°, AC / DC 24 V, modulating IP 66 NEMA4, Manual override with push-button

GM24G-SR-T - Damper actuator NEMA4 40 Nm, 150 s / 90°, AC / DC 24 V, modulating IP 66 NEMA4, Manual override with push-button


•    Control DC 0...10 V, adjustable
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Connection with terminals
•    Direction of rotation selectable
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp
•    Sound power level max.45 dB (A)

On request
SKU
GM24G-SR-T
£387.20 £322.67

Features


 



  • Fields of application The actuator is particularly suitable for utilisation in outdoor applications and is protected against the following weather conditions:
    – UV radiation
    – rain / snow
    – dirt / dust
    – humidity
    – Changing atmosphere / frequent and severe temperature fluctuations (recommendation: use the actuator with integrated factory-installed heating which can be ordered separately to prevent internal condensation * {in development})



  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. The measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.



  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.


  • Manual override Manual override with pushbutton possible (the gear is disengaged for as long as the button is pressed or remains locked).


  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops. Standard setting 0 ... 90°. The housing cover must be removed to set the angle of rotation.


  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.



More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

•    Electrical data Nominal voltage AC 24 V, 50/60 Hz / DC 24 V
•    Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
•    Power consumption In operation 4.5 W @ nominal torque
•    At rest 2 W
•    For wire sizing 7 VA (lmax 20 A @ 5 ms)
•    Functional data Factory settings Variable Setting
•    Torque Min. 40 Nm @ nominal Voltage
•    Control Control signal Y DC 0 … 10 V, input impedance 100 k ohm
•    Operating range DC 2 ... 10 V
•    Position feedback (Measuring voltage U) DC 2 ... 10 V, max. 0.5 mA
•    Position accuracy ±5%
•    Direction of rotation Motor As an option with clockwise or anticlockwise
•    Emergency setting position Reversible with switch 0 ... 100%
•    Direction of rotation Y = 0 V At switch position 1 or 0 , respectively
•    Manual override Gearing latch disengaged with push button
•    Angle of rotation Max. 95° , can be limited at both ends with adjustable mechanical end stops
•    Running time Standard operation 150 s / 90°
•    Sound power level Standard operation 45 dB (A) @ 90 s running time, <=52 dB (A) @ 150 s running time
•    Position indication Mechanical, pluggable
•    Safety Protection class III Safety extra-low voltage UL Class 2 Supply
•    Degree of protection IP66 NEMA 4, UL Enclosure Type 4
•    EMC CE according to 2004/108/EC
•    Certification Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14 cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-1:02
•    Mode of operation Type 1
•    Rated impulse voltage 0.8 kV
•    Control pollution degree 4
•    Ambient temperature –30 ... +50°C
•    Non-operating temperature –40 ... +80°C
•    Ambient humidity 100% r.h., non-condensating
•    Maintenance Maintenance-free
•    Dimensions See «Dimensions» on page 7
•    Weight Approx. 4.7 kg

Manufacturer Belimo