IO/DIM4/OI - Digital Input Mutiplexer Opto-Isolated

On request
SKU
IO/DIM4/OI
£25.00 £30.00
For use with BMS or other controllers to expand the I/O capacity.
The DIM4 multiplexer is microprocessor based and is designed to
convert 4 separate digital input signals into a single analogue
voltage output. Each combination of digital input signal is
converted to an output voltage level which can be then used with
a controller to read multiple status conditions.
The IO/DIM4/OI can accept 24V AC inputs and opto-isolate the
inputs from the module supply and the 0-10V signal output.
Opto-isolation is slected on Link 5. If isolation is not required and
the appliaction is using a common ground supply then Link 5 can
select the module 0V for the operation of the 24V AC
input signals.

FEATURES
* AC or DC Supply
* Expands controller input capacity
* 4 x Digital Inputs
* 0 to 10 Volt Output signal
* LED status indication
* Test Input Links
* DIN rail mounting enclosure
More Information
Description Converts 4 digital input signals into a single multiplexed / analogue output. Each combination of digital input signal is converted to an output voltage level which can then be used with a controller to read multiple status conditions. The IO/DIM4/0I opto-isolate the inputs from the module supply and the 0-10V signal output. The DIM4 multiplexer modules are compatible with most BMS controllers.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information

SPECIFICATION


Inputs 4 x Digital Contacts
Outputs 0-10 Volts DC rated at 5mA max
Multiplex Format
Input Signal :- 1 2 3 4
Output Voltage :- 4.8V 2.4V 1.2V 0.6V
(add values in any combination)
Power Supply 24V AC/DC ± 10%
Power Consumption 5mA + 0-10V output load
LED indication When input contacts closed
Terminals Max cable size 2.5mm
Input Test Link Jumpers
Operating Temperature -10 to +40°C
Dimensions 82mm high
                        45mm wide
                        42mm deep
Mounting DIN Rail

Manufacturer Titan