PCO2CON0S0 - Screw terminals for pCO2 Small

PCO2CON0S0 - Screw terminals for pCO2 Small

IOM0011500 - Data Acquisition I/O Module 115Va power supply

IOM0011500 - Data Acquisition I/O Module 115Va power supply

IOM0023000 - Data Acquisition I/O Module 230Va power supply

£235.13 £195.94
On request
SKU
IOM0023000
IOM0023000 - Data Acquisition I/O Module 230Va power supply The CAREL IOM* is a compact instrument for panel mounting (4-DIN module), versatile and easy to install. It has been designed to interface sensor and digital inputs required to monitor and manage a plant with the CAREL Supervision/Monitoring System. It communicates with CAREL protocol at standard speed via serial RS485. It can manage NTC, 4...20mA inputs, ratiometric probes, optoinsulated and/or volt free contact digital inputs. IOM is mainly used for RETROFIT applications where it is necessary to supply cost effective and reliable solutions to monitor units fitted with electromechanical or existing non CAREL serial compatible electronic controllers. The instrument can manage 6 inputs, (selected through the software), that allow management of: • 2 analog inputs (temperature NTC, 4...20mA, V ratiometric); • 2 analog (temperature NTC) or digital (free contact) inputs; • 2 digital inputs (voltage reading, optoinsulated). Alarm thresholds, timings, functions and associations between inputs can be programmed. An alarm relay (changeover contacts) and internal buzzer indicate alarm conditions or auxiliary commands. -
More Information
Manuals & Datasheets
 MANUAL   DATA-SHEET   APPLICATION NOTES 
Manual DATASHEET APPLICATION NOTES
Technical Information

TECHNICAL FEATURES

 

 

Power supply

IOM*230*: 230 Vac ±10%, 50/60 Hz
IOM*115*: 115 Vac ±10%, 50/60 Hz
IOM*024*: 24 Vac ±10%, 50/60 Hz

Rated power

2.7 W

Operating conditions

0T50°C, 20...80% r.H. non-condensing

Storage conditions

-20T70 °C, 20...80% r.H. non-condensing

Index of protection

IP20 for devices not installed in the electrical panel

Installation

DIN rail mounting

 

Carel