LM230A-S-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V

LM230A-S-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V 


•  Open/Close, 3-point, 1 x SPDT
•   IP 54, Manual override with push-button
•   Control with single- / 2-wire contact
•   Auxiliary switch integral, potential-free, 0...100 % adjustable
•   Connection Screw terminal with cover IP54
•   Direction of rotation reversible (right/left)
•   Angle of rotation limit. mechanical adjustable
•   Rating 1 mA...3(0.5)A, AC 250 V

On request
SKU
LM230A-S-TP
£81.60 £68.00

Features




  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.




  • Manual override Manual operation is possible with the pushbutton possible (the gear is disengaged for as long as the button is pressed or detented).




  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.




  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.



  • Flexible signalization Flexible signalization with adjustable auxiliary switch (0 ... 100%).




More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 1.5 W @ nominal torque
•     At rest 0.4 W
•     For wire sizing 4 VA
•     Auxiliary switch 1 x SPDT, 1 mA ... 3 (0.5) A, AC 250 V (0 ... 100% adjustable)
•     Connection Motor Terminals 4 mm2 (Cable Ø 6 ... 8 mm, three-core)
•     Auxiliary switch Terminals 4 mm2 (Cable Ø 6 ... 8 mm, three-core)
•     Functional data Torque (nominal torque) Min. 5 Nm @ nominal voltage
•     Direction of rotation Reversible with switch 0 or 1
•     Manual override Gearing latch disengaged with pushbutton, detentable
•     Angle of rotation Max. 95° , limited on both sides by means of adjustable, mechanical end stops
•     Running time 150 s / 90°
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II Totally insulated
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Low voltage directive CE according to 73/23/EEC
•     Mode of operation Type 1B (to EN 60730-1)
•     Rated impulse voltage 4 kV (to EN 60730-1)
•     Control Pollution Degree 3 (to EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 600 g

Manufacturer Belimo