LM230ASR-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V

LM230ASR-TP - Damper actuator 5 Nm, 150 s, 95° AC 230 V 


•  Modulating
•   IP 54, Manual override with push-button
•   Control DC 0...10 V
•   Operating range DC 2...10 V
•   Position feedback DC 2...10 V
•   Connection Screw terminal with cover IP54
•   Direction of rotation reversible (right/left)
•   Angle of rotation limit. mechanical adjustable


On request
SKU
LM230ASR-TP
£116.80 £97.33

Features




  • Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... 10 V and travels to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0 ... 100% and as slave control signal for other actuators.




  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.




  • Manual override Manual operation is possible with the pushbutton possible (the gear is disengaged for as long as the button is pressed or detented).




  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.




  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.



More Information
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
•     Nominal voltage range AC 85 ... 265 V
•     Power consumption In operation 1.8 W @ nominal torque
•     At rest 1 W
•     For wire sizing 4 VA
•     Connection Power supply Signals
•     Terminals 4 mm2 (Cable Ø 6 ... 8 mm, two-core)
•     Terminals 4 mm2 (Cable Ø 6 ... 8 mm, four-core)v
•     Functional data Torque (nominal torque) Min. 5 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ
•     Working range DC 2 ... 10 V
•     Position feedback (Measuring voltage) DC 2 ... 10 V, max. 1 mA
•     Auxiliary supply DC 24 V ±30%, max. 10 mA
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch
•     Direction of rotation at Y = 0 V At switch position resp.
•     Manual override Gearing latch disengaged with pushbutton, detentable
•     Angle of rotation Max. 95° , limited on both sides by means of adjustable, mechanical end stops
•     Running time 150 s / 90°
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class II Totally insulated
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Low voltage directive CE according to 73/23/EEC
•     Mode of operation Type 1 (to EN 60730-1)
•     Rated impulse voltage 4 kV (to EN 60730-1)
•     Control Pollution Degree 3 (to EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 700 g

Manufacturer Belimo