LRQ24A-SZ - Rotary actuator 4 Nm

LRQ24A-SZ - Rotary actuator 4 Nm

•    AC / DC 24 V, modulating
•    Running time motor 9 s / 90°
•    Operating range DC 2...10 V
•    Position feedback DC 2...10 V
•    Manual override temporary, permanent
•    Position indicator mechanical

SKU: LRQ24A-SZ

Shipped under 2 days

Excl. Tax: £143.41 Incl. Tax: £172.09

Product Description

Details

Features
 

  • Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the ball position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.

  • Simple direct mounting Straightforward direct mounting on the ball valve with only one screw. The assembly tool is integrated in the plug-on position indicator. The mounting position in relation to the ball valve can be selected in 90° steps.

  • Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressing
    the «gear disengagement» switch, the actuator moves to the home position.
    Factory setting: Y2 (counter-clockwise rotation)
    The actuator then moves into the position defined by the control signal.

      Manuals & Datasheets

      Manuals & Datasheets

      Manuals & Datasheets
       DATA-SHEET 
      DATASHEET
      Technical Information


      •     Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
      •     Power supply range AC 19.2 ... 28.8 V DC 21.6 ... 28.8 V
      •     Power consumption In Operation 12 W at nominal torque At rest 1.5 W For wire sizing 18 VA (I max. 20 A @ 5 ms)
      •     Connection Cable 1 m, 4 x 0.75 mm2
      •     Parallel connection Possible, note the performance data
      •     Functional data Torque (nominal torque) Motor Min. 4 Nm at nominal voltage
      •     Control Control signal Y DC 0 ... 10 V, input impedance 100 kΩ Operating range DC 0.5 ... 10 V
      •     Position feedback (Measuring voltage) DC 0.5 ... 10 V, max. 0.5 mA
      •     Position accuracy ±5%
      •     Manual override Gearing latch disengaged with push-button, can be locked
      •     Running time 9 s / 90° <)
      •     Automatic adjustment of operating range and measuring signal U to match the mechanical angle of rotation Manual triggering of the adaption by pressing the
      «Adaption» button
      •     Position indication Mechanical, pluggable
      •     Override control MAX (maximum position)  = 100%
                                          MIN (minimum position) = 0%
                                          ZS (intermediate position, only AC) = 50%
      •     Sound power level 52 dB (A)
      •     Safety Protection class III Safety extra-low voltage
      •     Degree of protection IP54 in any mounting position, UL/NEMA 2
      •     EMC CE according to 2004/108/EC
      •     Certification cULus according to UL 60730-1A and UL 60730-2-14 and CAN/CSA E60730-01:02 Certified to IEC/EN 60730-1 and IEC/EN 60730-2-14
      •     Rated impulse voltage 0.8 kV (EN 60730-1)
      •     Control pollution degree 3 (EN 60730-1)
      •     Ambient temperature -30 ... +40 °C (no restrictions
      •     +40 ... +50 °C (Caution: can only be used with restrictions. Please contact your Belimo representative.)
      •     Non-operating temperature –40 ... +80°C
      •     Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
      •     Maintenance Maintenance-free
      •     Dimensions / Weight Dimensions See «Dimensions» on page 2
      •     Weight Approx. 950 g

      ManufacturerBelimo

      Reviews