LU230A - Full-rotation actuator 3 Nm, 150 s / 360° / constant, endless AC 230 V

LU230A - Full-rotation actuator 3 Nm, 150 s / 360° / constant, endless AC 230 V


•    Modulating, MFT
•    Manual override with integrated position stop
•    Running time spring approx. 20 s
•    Control Open/Close with single-wire contact
•    Auxiliary switch 2 x int., potential-free, fix 5°, 85°
•    Emergency control closedYES


 

SKU: LU230A

Shipped under 2 days

Excl. Tax: £70.67 Incl. Tax: £84.80

Product Description

Details

Features
 

 

  • Simple direct mounting Form-fit direct mounting on a 12 mm or 8 mm damper spindle (with insert).The actuator can also be optionally equipped with a 10 mm form fit or an 8 ... 12 mm clamp (see «Accessories»).

  • Manual override Manual operation is possible with the self-resetting pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed).

  • Adjustable angle of rotation  The angle of rotation of the full-rotation actuator can be adjusted in 10° increments between 0 and 330°  with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

      Manuals & Datasheets

      Manuals & Datasheets

      Manuals & Datasheets
       DATA-SHEET 
      DATASHEET
      Technical Information


      •     Electrical data Nominal voltage AC 100 ... 240 V, 50/60 Hz
      •     Nominal voltage range AC 85 ... 265 V
      •     Power consumption In operation 2 W @ nominal torque
      •     At rest 1 W
      •     For wire sizing 4.5 VA
      •     Connection Cable 1 m, 3 x 0.75 mm2
      •     Functional data Torque Min. 3 Nm @ nominal voltage
      •     Direction of rotation Reversible with switch 0 or 1
      •     Manual override Gearing latch disengaged with pushbutton,
      •     self-resetting
      •     Angle of rotation Endless (adjustable 0 ... 330° with angle of rotation limiter ZDB-LU)
      •     Running time 150 s / 360°
      •     Sound power level max. 35 dB (A)
      •     Spindle driver Form-fit 12 mm or 8 mm (with insert)
      •     Safety Protection class II Totally insulated
      •     Degree of protection IP54 in any mounting position
      •     EMC CE according to 89/336/EEC
      •     Low voltage directive CE according to 73/23/EEC
      •     Mode of operation Type 1 (EN 60730-1)
      •     Rated impulse voltage 4 kV (EN 60730-1)
      •     Control Pollution Degree 3 (EN 60730-1)
      •     Ambient temperature range –30 ... +50°C
      •     Non-operating temperature –40 ... +80°C
      •     Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
      •     Maintenance Maintenance-free
      •     Dimensions / Weight Dimensions See «Dimensions» on page 2
      •     Weight Approx. 650 g

      ManufacturerBelimo

      Reviews