LU24A-MF - Rotating actuator 3 Nm, 150 s / 360° / constant, 0...1800°

LU24A-MF - Rotating actuator 3 Nm, 150 s / 360° / constant, 0...1800°

•    AC / DC 24 V, modulating, MFT
•    Manual override with push-button
•    Control DC 0...10 V (0...32 V adjustable)
•    Operating range DC 2...10 V, 0...32 V adjustable
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mech.+ elec.

SKU: LU24A-MF

Shipped under 2 days

Excl. Tax: £100.58 Incl. Tax: £120.70

Product Description

Details

Features
 

  • Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the ball position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.

  • Parameterisable actuators The factory settings cover the most common applications. Input and output signals and other parameters can be altered with the MFT-H parameterising device or the BELIMO Service Tool, MFT-P.

  • Manual override Manual operation is possible with the pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed or detented).

  • Simple direct mounting Form-fit direct mounting on a 12 mm or 8 mm damper spindle (with insert). The actuator can also be optionally equipped with a 10 mm form fit or an 8 ... 12 mm clamp (see «Accessories»).

  • Adjustable angle of rotation The angle of rotation of the full-rotation actuator can be adjusted in 10° increments between 0 and 330° with mechanical end stops.

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.

  • Home position When the supply voltage is switched on for the first time, i.e. at commissioning or after pressing the «gear disengagement» switch, the actuator travels to the home position. The actuator then moves into the position defined by the control signal.

 

        Manuals & Datasheets

        Manuals & Datasheets

        Manuals & Datasheets
         DATA-SHEET 
        DATASHEET
        Technical Information


        •     Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V
        •     Nominal voltage range AC 19.2 ... 28.8 V / DC 21.6 ... 28.8 V
        •     Power consumption In Operation 2 W at nominal torque At rest 1.2 W For wire sizing 3.5 VA
        •     Connection Cable 1 m, 4 x 0.75 mm2
        •     Functional data Factory settings
        •     Torque (nominal torque) Min. 3 Nm @ nominal voltage
        •     Control Control signal Y DC 0 ... 10 V, input impedance 100 kΩ Operating range DC 2 ... 10 V
        •     Position feedback (measuring voltage U) DC 2 ... 10 V, max. 0,5 mA
        •     Position accuracy ±5%
        •     Direction of rotation Can be selected with switch 0 / 1
        •     Direction of motion at Y = 0 V In switch position 0 bzw. 1
        •     Manual override Gearing latch disengaged with pushbutton, detentable
        •     Angle of rotation with mechanical limiting 0 ... 330°, adjustable in steps of 10°, with electrical limiting 0 ... 1800°, adjustable in steps of 1° without limiting Endless
        •     Running time 150 s / 360°
        •     Automatic adjustment of running time, operating range and measuring signal U to match the mechanical angle of rotation Manual triggering of this adaption by
        pressing the button «Adaption» or with the PC-Tool
        •     Override control MAX (maximum position) = 100% MIN (minimum position) = 0% ZS (intermediate position, AC only) = 50%
        •     Sound power level Max. 35 dB (A)
        •     Spindle driver Form-fit 12 mm or 8 mm (with insert)
        •     Protection class III Safety extra-low voltage
        •     Degree of protection IP54 in all mounting positions
        •     EMC CE according to 89/336/EEC
        •     Mode of operation Type 1 (to EN 60730-1)
        •     Rated impulse voltage 0.8 kV (to EN 60730-1)
        •     Control pollution degree 3 (to EN 60730-1)
        •     Ambient temperature range –30 ... +50°C
        •     Non-operating temperature –40 ... +80°C
        •     Ambient humidity range 95% r.H., non-condensating (to EN 60730-1)
        •     Maintenance Maintenance-free
        •     Dimensions / Weight Dimensions See «Dimensions» on page 5
        •     Weight Approx. 650 g

        ManufacturerBelimo

        Reviews