MCHRTF08C0 - FAN SPEED CONTROLLER-CUT PHASE PWM 8A/230VAC FASTON

Technical specifications:

Power supply: 230V Single-phase
Rated current: 8A
Frequency: 50/60Hz
Control signal: PWM for phase control (0 to 5V)
Index of protection: None (open board)
Dimensions: 82W x 107H x 58D
Input/output characteristic: Curve
SKU: MCHRTF08C0

Shipped under 14 days

Excl. Tax: £60.10 Incl. Tax: £72.12

Product Description

Details

The MCHRTF series electronic devices are single-phase voltage controllers that use the principleof phase control to adjust the effective voltage output to the load, based on the phase of thePWM control signal.
One typical application is the speed control of single-phase condenser fan motors, based on the pressure or the temperature measured on the heat exchanger.
The MCHRTF controllers are protected against short circuit with a fuse located on the outsideof the board, thus allowing easy inspection and replacement, where necessary (refer to Table 3 for the correct replacement of the fuse). Always check with the manufacturers that the motorsused are suitable for operation with phase control devices.

Manuals & Datasheets

Manuals & Datasheets

Manuals & Datasheets
 DATA-SHEET  BROCHURE 
DATASHEETBROCHURE
Technical Information

TECHNICAL FEATURES

 

 

Power Supply

230 Vac (-15% to +10%), 50/60 Hz

Control signal

PWM

Input signal impedance

180 kOhm

Operating conditions

-10T50 °C, <90% rH non-condensing

Storage conditions

-20T70 °C, <90% rH non-condensing

Index of protection

NONE

 

ManufacturerCarel

Reviews