COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

NM24A-SR - Damper actuator 10 Nm, 150 s, 95° AC / DC 24 V

On request
SKU
NM24A-SR
£112.00 £134.40

NM24A-SR - Damper actuator 10 Nm, 150 s, 95° AC / DC 24 V


•    IP 54, Manual override with push-button
•    Control DC 0...10 V
•    Auxiliary switch 0...100 % adjustable
•    Connection PVC cable 1m
•    Direction of rotation reversible (right/left)
•    Angle of rotation limit. mechanical integral
•    Spindle driver universal spindle clamp

More Information
Description

Features
 


  • Mode of operation The actuator is controlled by means of a standard control signal DC 0 ... 10 V. It opens to the position dictated by this signal. The measuring voltage U allows the damper position (0 ... 100%) to be electrically indicated and serves as a follow-up control signal for other actuators.

  • Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.

  • Manual override Manual operation is possible with the self-resetting pushbutton (the gearing latch remains disengaged as long as the pushbutton is pressed).

  • Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
     

  • High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Electrical data Nominal voltage AC 24 V, 50/60 Hz  DC 24 V
•     Nominal voltage range AC/DC 19.2 ... 28.8 V
•     Power consumption In operation 2 W @ nominal torque
•     At rest 0.4 W
•     For wire sizing 4 VA
•     Connection Cable 1 m, 4 x 0.75 mm2
•     Functional data Torque (nominal torque) Min. 10 Nm @ nominal voltage
•     Control Control signal Y DC 0 ... 10 V, typical input impedance 100 kΩ Working range
DC 2 ... 10 V
•     Position feedback (Measuring voltage) DC 2 ... 10 V, max. 1 mA
•     Position accuracy ±5%
•     Direction of rotation Reversible with switch 0 / 1
•     Direction of rotation at Y = 0 V at switch position 0  resp. 1
•     Manual override Gearing latch disengaged with pushbutton, self-resetting
•     Angle of rotation Max. 95° , limited on both sides by means of adjustable, mechanical end stops
•     Running time 150 s
•     Sound power level Max. 35 dB (A)
•     Position indication Mechanical, pluggable
•     Safety Protection class III Safety extra-low voltage
•     Degree of protection IP54 in any mounting position
•     EMC CE according to 89/336/EEC
•     Mode of operation Type 1 (to EN 60730-1)
•     Ambient temperature range –30 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Ambient humidity range 95% r.H., non-condensating (EN 60730-1)
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 800 g


 

Manufacturer Belimo