COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

R220P-060 - 2-way Pressure-independent control ball valve

On request
SKU
R220P-060
£107.50 £129.00

R220P-060- 2-way Pressure-independent control ball valve


•    internal thread Rp 3/4", DN 20
•    Housing nickel-plated, hot-pressed brass
•    Leakage rate A-AB air bubble-tight EN 12266




More Information
Description

Features
 


  • Mode of operation The characterized control valve is operated by a rotary actuator. The actuator is controlled by a standard modulating or 3-point control system and move the ball of the valve – the throttling device – to the opening position dictated by the control signal. Open the ball valve counterclockwise and close it clockwise.

  • Flow characteristic Equal-percentage characteristic of the flow rate ensured by the integral characterizing disc.

  • Constant flow volume  With an effective pressure of 30 ... 350 kPa, the result is a constant flow rate volume thanks to the integrated pressure reduction valve. Regardless of the differential pressure over the valve, a valve authority of 1 is attained. Even in the part-load range, the flow rate remains constant with each opening position (angle of rotation) and ensures a steady control.

Manuals & Datasheets
 DATA-SHEET 
DATASHEET
Technical Information


•     Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
•     Temperature of medium +5°C...+80°C (lower temperatures on request)
•     Rated pressure ps 1600 kPa
•     Effective pressure 30 ... 350 kPa
•     Closing pressure Δps 700 kPa
•     Allowed range max 2) 45 ... 100% of nom 1)
•     Flow characteristic Equal percentage characteristics (to VDI/VDE 2178)
•     Pressure stability At a differential pressure of 35 ... 350 kPa: ±10%, in the lower effective pressure range: ±15%
•     Rangeability Sv See «Type overview»
•     Leakage rate Tight, leakage class IV at 350 kPa (IEC 60534-4)
•     Pipe connector Internal thread acc. to ISO 7/1
•     Angle of rotation 90° (Operating range 15 ... 90°)
•     Installation position Upright to horizontal (in relation to the stem)
•     Maintenance Maintenance-free
•     Materials Fitting DN 15 ... DN 25: Forged fitting, nickel-plated brass body DN 32 ... DN 50: Cast, nickel-plated brass body
•     Valve cone and stem Chrome-plated brass
•     Stem seal EPDM O-ring
•     Ball seat PTFE, O-ring Viton
•     Characterizing disk DN 15 ... DN 20: Brass DN 25 ... DN 50: TEFZEL
•     Cage Brass
•     Diaphragm Polyester-reinforced silicone
•     Spring for valve cone Stainless steel
•     Dimensions / Weights see «Dimensions and weights», page 3
•     Motorizing see the complete overview of water solutions

Manufacturer Belimo