COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

R508K - 3-way control ball valve, PN16

On request
£78.67 £94.40

R507K - 3-way control ball valve, PN16

•    external thread G 3/4", DN 10, kvs 0,63
•    Housing nickel-plated, hot-pressed brass
•    Valve disk stainless steel
•    Seal PTFE / EPDM O-ring
•    Characterizing disk TEFZEL
•    Temperature of medium max. 100 °C
•    Characteristic A-AB equal percentage
•    Characteristic B-AB linear, 70% of kvs 
•    Leakage rate A-AB air bubble-tigh
•    Leakage rate B-AB 1...2% of kvs
•    Design mixing valve

More Information



  • Mode of operation The characterized control valve is operated by a rotary actuator. The actuator is controlled by a standard modulating or 3-point control system and move the ball of the valve – the throttling device – to the opening position dictated by the control signal. Open the ball valve counterclockwise and close it clockwise.

  • Flow characteristic Equal-percentage characteristic of the flow rate ensured by the integral characterizing disc. 
Manuals & Datasheets
Technical Information

•     Functional data Flow media Cold and hot water, water with max. 50% volume of glycol
•     Temperature of medium +5°C ... +110°C 1), (lower or higher temperatures on request)
•     Rated pressure ps see «Type overview»
•     Flow characteristic Control path A – AB: equal percentage (to VDI/VDE 2173), n(gl): see «Type overview» Bypass B – AB: linear, flow rate is 70% of kvs value
•     Rangeability Sv See «Type overview»
•     Leakage rate Control path A – AB: Air bubble-tight (BO 1, DIN3230 T3) Bypass B – AB: Approx. 1...2% of kvs value (in relation to the highest value within the DN (e.g. R513)
•     Pipe connector External thread to ISO 228/1
•     Differential pressure Δpmax 350 kPa (200 kPa for low-noise operation), Closing pressure Δps 1400 kPa
•     Angle of rotation 90°<) (Operating range of control path A – AB 15 ... 90°<), bypass B – AB 15 ... 70°<)
•     Installation position Upright to horizontal (in relation to the stem)
•     Maintenance Maintenance-free
•     Materials Fitting Forged, nickel-plated brass body
•     Valve cone and stem Stainless steel
•     Stem seal O-Ring, EPDM
•     Ball seat PTFE, O-Ring Viton
•     Characterizing disk TEFZEL
•     Dimensions / Weights see «Dimensions and weights», page 3
•     Motorizing see the complete overview of water solutions
•     1)The allowed media temperature can be limited, depending on the type of actuator. The correct values can be found in the corresponding actuator data sheets.


Manufacturer Belimo