COVID-19 UPDATE - We are still operating so orders will be fulfilled as normal. Some lead times may be affected due to supplier closure but we are endeavouring to ensure minimal disruption to service.

UE090XLC01 - humiSteam X-plus 90 kg/h, 400 Vac three phase, with built-in controller, cleanable cylinder

On request
SKU
UE090XLC01
£4,046.36 £4,855.63

UE090XLC01 - humiSteam X-plus 90 kg/h, 400 Vac three phase, with built-in controller, cleanable cylinder is the type of  “X” humiSteam humidifiers which has a built-in controller with graphic display and keypad for programming and controlling operation.


The following modes can be selected at any time:


- ON/OFF by external humidistat
- Proportional based on an external signal
- Proportional based on an external signal plus a probe to limit the maximum humidity in the duct
- Modulating based on the set point and the reading of a humidity or temperature probe (Wellness model)
- Modulating based on the set point, the reading of a humidity probe and a limit probe in the duct

More Information
Description

The new humiSteam Wellness model is the evolution of the humiSteam, with the addition of a new drain pump, and the new “W” control with large
graphic display for the centralised management of:

- daily and weekly time bands
- different temperature set points for the time bands
- up to 3 actuators for the distribution of essences, and 1 for the “sanitisation” cycle
- up to 2 fans and inside cabin light

In addition, the display-keypad can be detached from the humidifi er and connected in a remote position, to simplify integration into OEM products.

The new control, moreover, is based on pCO technology, one of the strong points in the CAREL product range, which offers the following advantages:

- ease of use thanks to the graphic display with icons and messages in various languages
- connectivity to various types of LAN (Modbus®, BACnet™, LON)
- remote diagnostics via GSM (optional)
- operating hour counter and alarm log management
- easy software customisation for OEM applications

humiSteam uses mains water and manages the water concentration completely automatically, preventing the formation of foam for the maximum safety of the steam bath.

Manuals & Datasheets

BROCHURE

Code Description Language Date Release
+302240551 Humidity control in printing applications ENG 27/05/2008 1.0
+302238341 humiSteam: the evolution of the species of electrode humidifiers ENG 01/03/2008 1.0

MANUAL

Code Description Language Date Release
+0300040EN humiSteam x-plus humidifiers ENG 03/09/2012 1.2
+03U0040EN humiSteam x-plus steam humidifiers ENG 03/09/2012 1.3
+0300041EN humiSteam x-plus ENG 24/08/2012 1.1
+030220621 humiSteam Xplus ENG 04/08/2009 1.4
Technical Information
Rated steam production (kg/h) 90
Power input (kW) 67.5
Power supply 400 Vac (+10 to -15%), 50/60 Hz three-phase
Steam connection (mm) Ø 2x40
Outlet pressure limits (Pa) 0-2000
Number of boilers 2
Operating conditions 1T40 °C, 10 to 90% rH non-condensing
Storage conditions -10T70 °C, 5 to 95% rH non-condensing
Index of protection IP20
Water fill
Connection 3/4”G male
Temperature limits (°C) 1T40
Water pressure limits (MPa-bar) 0.1 to 0.8 - 1 to 8
Instant flow-rate (l/m) 14
Total hardness (°fH) ≤40
Conductivity limits (µS/cm) 75 to 1250
Water drain
Connection Ø 40
Temperature (°C) 4.2/2000
Instant flow-rate (l/m) 45
Steam blower
Number 2
Type VRDXL
Power supply (Vac) 230
Rated power (W) 35
Rated air flow (m3/h) 650
Network
Integrated network connections UEX & UEY: Modbus®
Optional network connections UEX & UEW: RS485, BACnet™, LON®, Ethernet™, RS232 + GSM (optional)
Controller UEY / UEX / UEW
Manufacturer Carel