FLOR000000 - Flooding Sensor Ddetector Ribbon 25 m
The new flood detecting device is able to sense the presence of water in an environment. It is generally used to protect against flooding in computer rooms, offices, laboratories, special environments. It is made up of a detector (normally fitted on the electrical panel) and a sensor (installed in the position being checked). When the sensor is wet by the water, the alarm is automatically activated on the detector, switching the status of the relay.
-
TECHNICAL FEATURES
Power supply
24 Vac (-15%...+10%), 50/60 Hz
Power input
1.5 VA
Operating conditions
-10T60 °C, <90% H.R. non-condensing
Alarm relay output circuit
250 Vac 2 A resisitive, 2 A
inductive, cosfi=0.4, 2 (2) A, according to
EN60730-1 (100.000 cycles)
MAximum length of the
probe connection cable
500 m with single wire cable and double insulation
Cross-section of the connection cable
1.5 mm²
Standard compliance
CE EN 6000-6-2, EN 6000-6-4 (EMC), EN
61010-1 (safety)