SGE24 Belimo Positioners suitable for use with the modulating damper actuators LM..A-SR, NM..A-SR, SM..A-SR and GM..A-SR

For more information on each component of your ventilation system, go to iacs.

All Belimo accessories are currently in stock and can be delivered for free or in one to two days.

The Belimo SGE24 is a Positioners suitable for use with the modulating damper actuators LMA-SR, NMA-SR, SMA-SR and GMA-SR .

Iacs offers the most cheap Belimo system improvements.

If you have any concerns about installation or size, please refer to the aforementioned Belimo bespoke datasheet. If you require more specialised support, email iacs.

Features

Application The positioner is intended for the remote control of modulating actuators or for use as a minimum positioner (providing a bottom limit for the output signals from modulating controllers).The control range is 0 … 100% of the angle of rotation of the actuator.

Wide setting range The positioner receives its power supply through terminals 1 and 2.The position to which the rotary knob is turned produces a proportional control signal Y of either DC 2 … 10 V or DC 0 … 10V and thus a proportional change in the position of the actuator between 0 and 100%.

Simple changeover The changeover from DC 2 … 10 V to DC 0 … 10 V is selected by means of a wire link between the two terminals 5 and 6.

Simple mounting The SGE24 is designed for clipping on to a 35mm DIN rail top hat profile.

•     Electrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V Vcc from ..M230ASR
•     Nominal voltage range AC/DC 19.2 ... 28.8 V
•     Power consumption 0.3 W For wire sizing 1VA
•     Power output For max. 10 actuators
•     Connection Terminals (for max. 4 mm2)
•     Functional data Control signal Y DC 2 ... 10 V @ max. 1 (DC 0 ... 10 V switchable by jumper, terminals 5 / 6))
•     Scale 0 ... 100% 
•     Safety Protection class III Safety extra-low voltage
•     Degree of protection IP20 
•     EMC CE according to 2004/108/EC
•     Mode of operation Type 1.B (to EN 60730-1)
•     Ambient temperature range –20 ... +50°C
•     Non-operating temperature –40 ... +80°C
•     Humidity test To EN 60730-1
•     Maintenance Maintenance-free
•     Dimensions / Weight Dimensions See «Dimensions» on page 2
•     Weight Approx. 70 g